Interested in anyone's experience. My 625 battery feels like it's degraded a little over time, it's pretty much cooked on 20-25 mile rides whereas a year ago, 30+ was easily in reach. So I'm weighing up replacing it but before that, I'm minded to have it tested.
To that end, I spoke to an LBS...
Anyone know of a decent source of indivdual Shimano sprockets? I have a worn SLX M7100 12 speed cassette but it's all good save for the three smallest sprockets. It's designed so that these can be replaced but while I would like to keep it going, I'm finding it surprisingly difficult to find the...
Fully working. Approx 3 hours run time. The light has fixed & motion sensor mode. In fixed, it has four brightness levels. In Motion sensor, it has three + two flashing modes, easily switched between fixed & Motion sensor. In motion sensor mode, the light dims after a few seconds to save battery...
I'm noticing this in my right wrist lately. It generally comes on about ten miles in to a ride.90% of my riding is longish trail stuff, sat down. I haven't made any changes to the contact points recently, so I'm interested in advice on what I guess is adjusting bars, saddle etc. aimed at...
Non smart system battery. It's off a 2021 Focus Jam2. The bike has about 3000 miles & the battery will have north of a hundred charging cycles on it. Although I haven't had it tested, my guess is it's now sitting somewhere around 550-600 watt hours. I can say it's always stored indoors in cold...
It's about an hour away from me, I quite fancy a change of scene, especially while the trails here are knackered but never been & don't know much about the place. Worth a day out?
Have a good one everybody. May Santa bring you those sintered pads you've been longing for & if today is not what you hoped for, may you at least have peace & comfort. The trails are out there, waiting for you. 🚴♀️
🚴♂️🚴♀️🚴♂️
So I'm back on my pals Powerfly. The bike has a noisy front wheel. I've stripped it & found a cup & cone front hub where the locknuts have worked loose & water has got in & knackered the ball bearings.
I'll try to get away with new ball bearings, as the cups & cones look ok. Long shot but...
Anyone have a list of frame bearings or know of an accurate kit? I'm swapping out but would rather do it in one go than remove them individually to work out what I need. The trails are calling and all that.
Been chasing a clicking noise on the bike. So far, I've been through the frame bearings, headset, rear shock mounts & seatpost, disassembled & serviced. Through a process of elimination, I've narrowed it down to somewhere around the motor. It's a clicking sound & rotational. Before I fire up the...
Any of you cool Trek dudes can point me towards the hanger for this bike? A friend of mine has mangled his & I'm going to replace it. I've only got the details per the title so far, assuming it's a Shimano drive train but won't know until the bike gets here. Thanks people.
Probably a bit niche but I've had a tough time settling down a new SLX drivetrain on my bike - various skipping chain & alignment issues. The last piece of the puzzle I solved yesterday. There has been a persistent problem with the chain rollers not meshing with the largets sprocket. I wondered...
I feel I should know this but I can't work out if my 2021 Jam2 has walk mode. In the manual, it says press the walk assistance button - I haven't got one of those on my Kiox or the controller. Walk would be handy for lubing the chain, so do I have it on my bike?
Little help? Just swapped out all my old drivetrain. Now I'm running a 12spd SLX cassette, XT Deore derailleur, Deore 12spd chain & Raceface 34t chainring. Everything is brand new except the derailleur, like three rides old.
The chain is skipping in top gear and only top gear Even moderate...
Mine is worn & will need replacing soon. Does anyone know what offset is on the factory fitment? I see 52 & 55mm options. I'm guessing 55mm for a boost 12spd bike but want to check before buying. Cheers.
MEP's are proposing amongst other things, a reduction in VAT for the sale, repair & rental of bikes & E Bikes. This is a proposal, not tabled legislation, so nothing concrete but assuming it happened. do you reckon your favourite friendly trans global brand will knock 20% off your next bike? 🥳🤔...
I'm taping up a rim for a new tire. It may be me, may be the wheel, a Race Face AR30 offset 29 but I repeatedly have the same problem setting these up. I get air leaks at the valve. This is usually a taping problem or a valve install error. Usually with fettling I can get it to seal but today...