Search results for query: *

In the sram manual for Lyrik 2018 forks it shows 3mm of oil for the upper tube (see image). However, in the instructions i can’t see any reference to putting this oil in. I did, and sinc, every time I ride there is a thin film of oil on the stanchions. In the 2017 manual there is no reference to...

I recently did a 200 hour service on my lyric forks and since then after each ride I get a thin coating of oil on the stanchions. I bought my bike in 2018 so I’m assuming these are 2018 forks. I have noticed that in the 2017 service guide there is no mention of adding oil to the upper tubes...

I have just completed a 200 hour service on my 2018 Lyrik forks. I wrote to Sram to find out the correct 200 hr service kit which I had upgraded with the newer Debonair C1 upgrade kit (a relatively cheap upgrade which improves performance noticeably) and got a message back with the code number...

Shout out for Jeremy from Sram. I wrote to Sram to find out the correct 200 hr service kit for my 2018 Lyrik forks which I had upgraded with the newer Debonair C1 upgrade kit (a relatively cheap upgrade which improves performance noticeably) and got a message back with the code number. However...

I want to order a 200 hour service kit for my 2018 Rockshox Lyric RCT 3 (on a Specialized Kenevo) . The fork originally came with a solo air spring but I upgraded it with a Debonair spring. One shop says that the correct service kit is ROCKSHOX SERVICE KIT B1 200H FOR LYRIK / PIKE DEBONAIR 29+...

I went to one of my local LBS yesterday and asked about giving my Fox rear shock a 50 hour service (removal of air can, replace seals and oil), asking about a service kit. I was told that I should let the shop send it off to Fox for this job and it would cost about chf 200 (about £190) and it...

I notice that the new H20Rise has motor with 95nm. I guess it’s the same motor as my H10. Does this mean that we will be able to update our 60nm motors?

I’ve just done the biggest ride so far on my rise H30 using the battery extender. It was 45 km and about 1000 m of ascent. All of this was done in boost at the highest level of support - (my excuse is I was riding with people on full fat bikes]. When I got back I had 7% left, which I guess is...

I managed to crack the controller switch on my 2018 Kenevo, probably from over it tightening the grub screw. I went to my LBS and as a replacement they sold me two cables which they said replaced the single controller and cable. I tried to fit the new cables the other day and ran into two...

Photos which should have been attached to my precious post!

When I bought my Rise H30 I had the shop update my front brake to a 203 rotor with STX 4 pot callipers. They had a lot of problems fitting this and had to take an adaptor off another new bike. When I came to change the pads I found that there was a strip about 2mm wide which had not been worn so...

I have two bikes, a 2018 Kenevo and a 2022 Orbea Rise, so more or less one bike for technical downhill and bike parks, the other for cross country, with a much longer range. Despite being best at what they are designed for, the Kenevo is fine on cross country rides and the Rise manages pretty...

I have done 390k on my H30 Rise, at least according to the on board STEPS computer. However, according to my Garmin edge I’ve done 337k. Yesterday I did a ride which according to my Rise was 33.9kk but my Edge said was 31.1k. Using a mapping program the route came out at 32.2k. I understand that...

I wanted to buy a Rise H15 but they are not available in Switzerland as this year’s stock was all stolen from a lorry! My LBS persuaded me to get the H30 instead. He gave me a pretty good deal and I had the brakes upgraded to 4 pot SLX with the 200mm rotor on the front. I was going to upgrade...

I have been trying to get my Garmin ebike field app to pair with my Orbea Rise with my edge 820, but it does not seem to find and pair with the Orbea battery. This is supposed to happen automatically. In fact, my app has stopped pairing with any extra batteries. For some reason my display...

It’s interesting that you say that. We seem to spend a fortune on having a lighter bike and testers rave about the handling of the latest generation of lighter ebikes, being much closer to analogue bikes and thus much easier to jump, manual and generally move around, let alone lifting one over a...

I have tried toolbox app for my garmin edge but it’s annoying that you can’t choose the tiles on a screen. It seems you have to have the five tiles the app gives you. All interesting info but lacks a clock, which is a pretty basic and useful function. One can show the clock on the Shimano...

Picked up my Rise H30 A couple of days ago. I wanted an H15 but all the Swiss ones (200 of them apparently) were stolen from a lorry so impossible to order one and I can’t find one in my size in my Canton (I have to buy in Canton to qualify for ebike grant). However, I upgraded the brakes to 4...

I know there are several posts about walk mode problems but I had a new one yesterday. On my 2018 Kenevo It’s never worked that well, often starting very slowly before getting going, or taking ages to start or just stopping after which I have to turn the motor off and on. However, yes it would...

I have a 2018 Kenevo. I live in the Alps and for where I ride the Kenevo looks after me very well. It still works as well as the day I bought it and I'm approaching 5000k. The only issue is the battery. It now has about 90% health and it seldom charges to 100% - usually between 96 and 99%. Not...