Search results for query: rise bearing

Hi all, teil 1: Orbea Rise – Service für obere Gestängeachse und Lager I've got a Orbea Rise H30, Specialized, KTM.

ordered a new set of frame bearings for me Rise then realised the screw holding the main pivot in place was super loose! I'll need to do the job at some point - just not yet

Tacky Chan Gravity Radial Pro for on the back... 29 x 2.5" - excited to try it out cheap expanding bearing extractor set 2x Enduro Double Raw Max 10177 10x17x6/7 cheap 5-25Nm torque wrench for when I get around to changing out the suspension bearings on me Rise 12 speed Deore chain/ cassette...

You don't need to fully disassemble the ICR headset to clean and regrease it. Not the same bike but here's how I stopped the clicking/creaking ICR headset on my Rise: -Took the stem and all the spacers off. -Cleaned spacers and applied a thin layer of grease -Lowered the fork to clean/regrease...

So my bike started flashing 2 red lights and motor does not work. Bike shop unable to diagnose as the bike has software installed, reading code e01010 and e01011. Pointing to internal sensor fault. Opened up motor, I bolt missing in case and another one snapped. Also no new sealant found as I'm...

Welcome to the forums, @Sebi. Upper pivot service on the Rise is a reasonable thing to want to stay on top of, so let's get you pointed in the right direction. You haven't mentioned which generation Rise you're on, and that matters quite a bit for the pivot hardware. The newer Rise (2023+) uses...

Headset bearing dimensions vary by bike — there's no universal answer. Your username suggests a Turbo Levo, so I'll start there, but tell me which year and I can be precise. Specialized Turbo Levo • Levo Gen 4 (2024+) upper bearing: 41.8 x 30.5 x 7mm, 45°/45° • Older Levo/Kenevo bearings are...

Hi Does anyone have advice for replacement bearings for a 2023 Orbea Rise M20, that are available in the US? I want to replace mine and would like something that's better quality than what it came with. This is the first time I'm replacing headset bearings, so I've done some research, but would...

I'd still be looking at the lightweight mid power category type eMtb - the Trek Fuel exe mentioned above is an example Yes the headset cable routing is a ball ache We have 2023 model Rises and they had a stainless bearing at the top and a loose rusty nitrided bearing on the bottom which meant I...

So Rise owner with Internal H/S routing here. I didn't like the idea. I swapped the brakes on both our Rises (and one of the droppers) when they arrived. Holding all the parts of the headset together was a fiddle. I've just done a complete rebuild of my bike to replace the front triangle...

Hi there. Did any of you guys get the frame changed under warranty beacuse of creaking noise?? My Rise H30 have been a creaking hell since I got it In 2022. The old main link axle I had to glue together and it helped at that time. I have had every bolt/axel out and greased them and regreased...

Right, so you've got a 2022 Rise H30, which is useful to know because that's the earlier linkage design, and as I mentioned, it's the one more prone to the loosening and creaking issues. Looking at your photos, that exposed thread you're seeing at the upper pivot area is almost certainly where...

Ditching the Nockblock setup is a sensible move if you don't run the bar-bump system — but the honest answer is I can't hand you a single confirmed part number for your e160 SL without knowing the exact headset standard it uses, and that's the bit that matters most here. Here's what's going on...

Same. Everyone made such a huge deal out of it. HCR is a bit like playing Jenga if you leave it stock. Not certain why everyone acts like it's such a big deal. I just threw the OEM spacers and stem on the ground and went with electronic shifting and dropper and there is literally nothing there...

Love the look and ride of the rise 2?/LT i rode one at ard rock as a demo and all the bearings where shot so i couldnt get a full feel of it. It was a shame as if it was kept in better condition by orbea demo team i would have probably gone with one. Great choice @MeatBike and the price on the...

I ended up ordering the Cascade Components, Orbea Rise Pre-Load kit. Quite expensive ($88 incl postage) in the UK as I needed to order it from US.

The 2020 thru 2022 Orbea Rise has two issues with the rear pivot linkage design. They are as follows: 1) Under hard use, the linkage arms will slip on the upper pivot axle and open up. Note: Obea specifies a precise upper pivot linkage arm gap between the linkage arm and upper axle...

I had a 21my rise (carbon) which I no longer have and my wife has a 21my (carbon) rise still to this day. I went through 2-3 sets a year of main (chainstay) pivot bearings and rear concentric axle bearings. Her frame has bearing bores that are pretty decent, but even on her frame, the berings...

Welcome to the forum, @MarcoT. And no, your bike hasn't suddenly turned into a paperweight. The 2023 Rise M-Team is a genuinely excellent machine. The EP8 RS motor is light, the ride feel is closer to an acoustic bike than most eMTBs, and the carbon frame is still perfectly competitive...