Recent content by davarello

Just put a Zeb Ultimate on my 19 Levo Comp - big improvement over Revelations in holding a line across roots and off cambers, plus I can run a 220 rotor

I started off with VistaLites in the 90's and then when I got back into riding about 15 yrs ago I bought my first Gloworm lights. Not cheap, but you can customize the beam pattern with changeable optics, their mounts are nice and clean and the remote makes changing output easy. This is the X2...

Not the cheapest option but the new Gloworm generation 2 lights look good - better cables/plugs, battery displays, handlebar remote and customisable optics Gloworm X2 Adventure Lightset (G2.0) | Glowormlites

It will fit in an Osprey Talon 44 in Large with the guard still attached. Pack has a floating top to handle the length.

The Brose on my Levo cut out mid ride a couple of times, so I took it to the shop for them to have a look at it, only thing they could see wrong was dirt and disc dust build up on the speed magnet on the rear disc. Gave it a clean, no issues since.

About -15c e-fatbiking in Calgary January last year

I'd call that a ramp or a pitch

I've broken two of those on my 2019 Comp, no major jumps or stunts, but a constant 130kg load isn't easy on parts. Having said that, the rest of the Roval wheelset has managed more than 5000k without a single issue

I'm 6'5" and 125kg (275lb) and fit an XL Levo no problem. If I was buying a new bike an XL Trek or Giant would fit OK, if it was a new Levo I'd be an S5 or S6

I've had a few issues with my Levo over the last two years, but nothing that wasn't resolved quickly, and mostly part failures, nothing to do with the motor. Last one was this seatpost nut exploding, resulting in long ride home standing up the whole way. I'm going to look at the new alloy...

Actually doesn't make much difference so long as the bell isn't touching anything and can resonate

Timber Bell is a bit tricky to mount discreetly, but I ended up with it over the right hand brake lever where I can switch it on and off without letting go of the grip.

Agree, I run the timber bell and its great on any trail with blind corners, walkers or livestock. Often get thanks from walkers as I pass.

20f/25r on Butcher 2.6/Eliminator 2.6 Blkdmnd with Cushcore in both. I'd weigh 130kg all kitted up. Been as low as 15/18 without issue.

I'm running a Butcher 2.6 Grid on the front and an Eliminator 2.6 BlckDnmd on the rear, both on Cushcore (20f/25r psi). No issues at all for my riding on everyday trails and intermediate bike park runs, good grip at relatively low pressures for my weight (125kg) without any squirm. Only thing...