New Dengfu Avinox based Frames
- Thread starter TQFreak
- Start date
Mario Antony
Active member
When you buy a Dengfu, is it the kit: frame+powersystem, or you have to buy powersystem on other sites?
for Bafang example.
for Bafang example.
Waynemarlow
E*POWAH Elite
Normally they can supply frame, battery, motor and wiring loom. If they can then they are probably the first company tooffer such. Good light frames as well circa 2.5kgs.
E125 For Avinox Motor Full Suspension Frame-Dengfu Sports
E125 FRAME CAN BE CUSTIMIZE
m.dengfubikes.com
You can pick up the other 3 frames from there.
Yotaismygame
New Member
Interesting!
xtraman122
Well-known member
That’s real interesting because there’s definitely no way for a consumer to buy them direct right now, nor can they go to Avinox directly for support. I’m a little surprised Avinox is willing to entertain the DIY market like this at all.
Mario Antony
Active member
Avinox can reach a "problem", that is not having production capability, let alone warranty issues.
Let's see what will happen, they have plenty of positions open on their website, so it seems they are urgently increasing the team - that's good news.
Let's see what will happen, they have plenty of positions open on their website, so it seems they are urgently increasing the team - that's good news.
If they say "now", it means that in the future there will be
Yotaismygame
New Member
As someone who enjoys building bikes and has a avinox bike on order. If the price is right for bare frame I could be tempted to try a frame and swap my parts over.
At the end of the day, despite Avinox systems not yet being available to buy, the frame could be a good replacement for an out of warranty broken bike in another model?
Swap the running gear across and you have a good Avinox eMTB that's not like the others...
Swap the running gear across and you have a good Avinox eMTB that's not like the others...
xtraman122
Well-known member
Pretty good looking frames in the pics, it’s amazing how much the small downtube helps with the appearance of the bike. The 6-link E130 is an interesting looking design.
Who’s There
Member
I wish DengFu would discover flip chips, a mixed would really up the appeal for me.
At least they are shortening the seat tubes.
At least they are shortening the seat tubes.
May be. Like mostly chines company, who have't the same conception of "warranty" word, than occidental peoples and they don't integrate his value in final price.just remember before you buy, dengfu doesnt honor any kind of warranty
But dengfu have proved that they make on market strong frame (E10). Not the case of all other chines brands, like light carbon (LCE971) for exemple.
Where are those positions listed?
newtcyclist
Member
Nubby asking...will any other motors work in that frame, or are they only designed to house the Avinox ?
Those are the frames specifically for the Avinox system. If you look on the linked website, it also shows their other frames for different motor systems.
Waynemarlow
E*POWAH Elite
Does anyone have a drawing of the Avinox motor profile ( mounting locations ) as the M820 motor is not unsimilar. Maybe as an interim we could fit with an adaptor the M820 motor. Sadly the M820 is limited to about 650W’s max but it’s an option until the M25S become available.
xtraman122
Well-known member
I don’t like their quality either, the bearings on my frame were very crunchy, some hardware mismatched and over tightened/under tightened in places. Very poor documentation, and the paint wasn’t the best either. It’s held up fine for me, so no complaints on functionality overall, but I did not like dealing with the company at all.just remember before you buy, dengfu doesnt honor any kind of warranty
because most are low effort shit companies, like dengfu
they used to okay ish
but now they cheap out on carbon strength, design , bearing quality and english speaking staff. if there is ever any problem they think they can get away with telling you to fck off..
like offer real costumer and after service in 2026 or die as a brand
i think many people agree with me that dealing with dengfu makes your head spin backwards
they are the most rude and arrogant company you will ever face in this emtb world.
so please think before you spend anything on them. because when there is any kind of problem you are alone...
The reliability of those avinox motors is also something that is yet to be seen...
they used to okay ish
but now they cheap out on carbon strength, design , bearing quality and english speaking staff. if there is ever any problem they think they can get away with telling you to fck off..
like offer real costumer and after service in 2026 or die as a brand
i think many people agree with me that dealing with dengfu makes your head spin backwards
they are the most rude and arrogant company you will ever face in this emtb world.
so please think before you spend anything on them. because when there is any kind of problem you are alone...
The reliability of those avinox motors is also something that is yet to be seen...
Last edited:
solsticebikeworks
New Member
- Apr 15, 2026
- 1
- 0
Crazy they actually put that thing on display! Sharpie on the cranks, a broken screen and a mix of old dirty parts. Weird!
they will send it to their customers like that so im not surprised they didnt notice it before placing in into their stand like that
Waynemarlow
E*POWAH Elite
Having purchased two frames E10 & E69 from Dengfu I have no issues what so ever. E10 was bought in 2019 ( Probably the first into the UK ) and now has done nearly 5K miles of very harsh UK riding conditions, just changed the bearings this year on the suspension. Quite impressed with all the small O rings protecting the bearings and the quality of layups ( I just have the frames in Gloss and can see all the lay ups ). Any Emails or enquiries are responded within a couple of days apart from the Chinese holidays. Have to say no real complaints so far.
Every brand of EMTB's have some problems, Dengfu I guess are no different.
Every brand of EMTB's have some problems, Dengfu I guess are no different.
