Wanted Shimano 31.8 clamp for SC-E7000 (part #Y79G01020)

[Bigtuna00]

I'm upgrading the bars and stem on my wife's Orbea Rise H30, and will be switching from 35mm to 31.8mm bars. Hoping someone might have a spare 31.8 clamp to sell, or we could swap clamps. I know the display includes both clamps when purchased at retail so if you bought one and are using 35mm bars you likely have a spare clamp hiding somewhere

They seem to be for sale on some Japanese Yahoo shops but that's about it.

I'm in California, USA FYI.

Thanks!

 

[Husky430]

Had exactly the same problem when I replaced my wifes bars with a fat version, I just used a longer screw in the existing clamp which worked and because it was underneath you cant see it.

 

[Bigtuna00]

I found an SC-E8000 on ebay so I'm upgraded her to color instead

 

[Bigtuna00]

In case anyone finds this thread, I completely forgot that the SC-E8000 is NOT compatible with the EP8 motor. You can't swap from SC-E7000 to SC-E8000. There are several other compatible displays for EP8, but the SC-E8000 is not one of them.

However with that being said, even though the SC-E8000 clamp has a different part number (Y71F00002), it's exactly the same as the SC-E7000/SC-EM800 clamp. So I ended up with a very expensive 31.8 clamp

 

[FloridaDan]

In case anyone finds this thread, I completely forgot that the SC-E8000 is NOT compatible with the EP8 motor. You can't swap from SC-E7000 to SC-E8000. There are several other compatible displays for EP8, but the SC-E8000 is not one of them.

However with that being said, even though the SC-E8000 clamp has a different part number (Y71F00002), it's exactly the same as the SC-E7000/SC-EM800 clamp. So I ended up with a very expensive 31.8 clamp

This just helped me, thanks! My Rise came today and I discovered the clamp issue when installing my riser bars. I found exactly one clamp with those part numbers, on ebay, and hit buy it now quick.

 

[newtgunslinger]

I'm upgrading the bars and stem on my wife's Orbea Rise H30, and will be switching from 35mm to 31.8mm bars. Hoping someone might have a spare 31.8 clamp to sell, or we could swap clamps. I know the display includes both clamps when purchased at retail so if you bought one and are using 35mm bars you likely have a spare clamp hiding somewhere

They seem to be for sale on some Japanese Yahoo shops but that's about it.

I'm in California, USA FYI.

Thanks!

Still have the 35mm clamp - you’ve got a buyer if you do.

 

[Bigtuna00]

Naw, I sold it with the SC-E8000