3D printing

emtbPhil said:
I started my career in 3d design and CAD before ending up in software engineering.
Needing a bit of a hobby for winter I’ve gotten back into it with 3D printing.

My first venture was to design a wall mount for my Bosch charger which I’m now selling on eBay
www.ebay.co.uk

Bosch Ebike Battery Charger Wall Mount Hanger (PRE 2022 bikes) | eBay UK

WARNING: These do NOT fit the latest 2022 Bosch Smart system. 6 amp - 36-6/230 - 0 275 007 918.
www.ebay.co.uk

I‘ll put a thread up in for sale if anyone wants one a bit cheaper on here
But if anyone needs anything printing or has an idea for a design. Hit me up.
l have a lot of free time and I’m running out of ideas ?
If you need something making as long as you cover the material and postage I’ll sort it out
Click to expand...

Not to question your great idea but I went a different route when I noticed how hot the charger gets when its in use. My thought was by adding heat sinks it would keep the charger temperature down to help it last longer. It now runs cool. I may be way off (I am not an Electrical Engineer) as I am sure the designers considered the generated heat when they designed the charger but it could also be a built in obsolescence (cost savings) so we all will need to buy new chargers when ours fail. A small fan added to your case could do something similar but cooling might not be as even. Thoughts?

charger.jpg
 
⚡ EMTB Pro Go Pro — Living Intelligence Reports, exclusive discounts & ad-free Up to 25% off Peaty's, PEMBREE, Magicshine & more · Ad-free browsing · Pro badge See the deals →
Interesting idea

Mines in the garage where it's 9c so I've never noticed it get warm
 
Konanige said:
A cable exit port insert for non driveside of Turbo Levo SL alloy, you'd sell one for every SL alloy thats been sold out the door..
Click to expand...
Yes, I was about to post this as a generic request. A range of plugs to seal cable entry into eeb frames to limit water ingress. It would need to be a range of sizes, especially for the finer eeb control/info box arrangements different manufacturers use. Would that be an issue with printing with a suitable material (not too hard…)?
 
Charger holders and battery holders is a great idea.
There‘s a guy, Martin Ritschel, in Europe - Log in to Facebook - who’s selling them printed for Specialized chargers/batts. He’s also selling a replacement printed component that‘s replaces a fragile part of the lock for the battery retention device for the top of the ‘in down tube’ Shimano batteries. Shimano only sell a complete mechanism which is impossible to find and expensive (I’ve bought it for my Bullit and it was amazing value).
 
EDIT:- Oh, right, now I see how the posts that arrive at the bottom of the pages here are populated - well done @Rob Rides EMTB - I’ve now got lots of links to threads in the forum about 3D Printing. I guess we’ll all be able to see them. I’m not just slow on the trail….???

Quite by coincidence the following link made it to the top of those links at the bottom of this forum page:
www.emtbforums.com

3D Printed Pulley/Chainring Remover

I designed a 3d printed Pulley Remover, which can also be used for removing the chainring of a Levo. I had to replace the motor cover on my Levo and used it successfully for that. It's similar to something like this: https://static.grainger.com/rp/s/is/image/Grainger/4YT14_AS01?hei=800&wid=935...
www.emtbforums.com www.emtbforums.com
 
boBE said:
I print at home in PETG for most bicycle parts but for parts that need to be really strong I send it to Shapeways for nylon SLS. Here is a pump mount I made for my Levo SL (PETG on Prusa Mini)

View attachment 72932
Click to expand...
In a similar vein, an extended bracket mount for the Znex Notstrom battery to fit an emtb:

ZNEX Bracket Mount - ZNEX ®

Spare bracket for the notstrøm
www.znex.de www.znex.de
1633256155442.png


...or maybe even a bottle mounting bracket extender to be able to use any standard bottle mounted product on an emtb
 
Coolcmsc said:
Charger holders and battery holders is a great idea.
There‘s a guy, Martin Ritschel, in Europe - Log in to Facebook - who’s selling them printed for Specialized chargers/batts. He’s also selling a replacement printed component that‘s replaces a fragile part of the lock for the battery retention device for the top of the ‘in down tube’ Shimano batteries. Shimano only sell a complete mechanism which is impossible to find and expensive (I’ve bought it for my Bullit and it was amazing value).
Click to expand...

I'm trying to get other charger mounts designed but it's hard not having the chargers to hand
I'm working with a guy on ebay at the moment to do a custom Shimano one. I'll see if I can look at specialized too
 
SGS said:
Handlebar stands for when you need to put your bike upside down

View attachment 72958
Click to expand...

You know I was thinking of doing these! But I want to try and to the handlebar bit hinged with a clip so you can put them on without taking the grips off
 
Konanige said:
A cable exit port insert for non driveside of Turbo Levo SL alloy, you'd sell one for every SL alloy thats been sold out the door..
Click to expand...

Do you have a photo at all?
 
Plugs to block off the bottom of your head tube to stop mud, dust etc from penetrating.

In the past I have used a plug that anglers use to reinforce the ends of their dismantled fishing rods. On my last bike I used a flip-top lid of a giant pack of Smarties. The best bit was that it was blue, like my bike.
 
emtbPhil said:
Do you have a photo at all?
Click to expand...
As you can see from the pic its a pretty poor finish from Spesh. The port on the other side is a different shape unlike the Stumpjumper which is the same both sides. I did contact Specialized rider care but they were of no help. I reckon every owner would stump up for a solution.

16332848987671681905652.jpg
 
steve_sordy said:
Plugs to block off the bottom of your head tube to stop mud, dust etc from penetrating.

In the past I have used a plug that anglers use to reinforce the ends of their dismantled fishing rods. On my last bike I used a flip-top lid of a giant pack of Smarties. The best bit was that it was blue, like my bike.
Click to expand...

I’ve made one for a fox 34 that holds an apple AirTag in it ?
 
Konanige said:
As you can see from the pic its a pretty poor finish from Spesh. The port on the other side is a different shape unlike the Stumpjumper which is the same both sides. I did contact Specialized rider care but they were of no help. I reckon every owner would stump up for a solution.

View attachment 73044
Click to expand...

Wow yeah that’s poor!!
I could definitely do something but I’d probably need a sketch, dimensions etc…
 
First prototype design for Shimano charger mount done
Printing now and then off to the guy on ebay who's going to try it for me

1633288969213.png
 
Love that! I’ve not tried printing flexibles yet but I do want to give it a go

the cube hybrid stereo I have collects mud like mad there so might see if I can make something
 
steve_sordy said:
Volume spacers for shocks and forks.
Click to expand...

You mean like the drawer full of them I have that came with the bikes, shocks and forks? ;-) I have accumulated every size, shape and color ever made I think.
 
Sorry for the resurrection of an old thread, I'm after a battery cover/ plate for my heckler. Just managed to get a spare battery and I'm F'd if I'm going to pay £75 for a bit of plastic?
Happy to pay one of you super hero's to make one for me.
Screenshot_2023-01-31-20-47-46-84_40deb401b9ffe8e1df2f1cc5ba480b12.jpg
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    674K
    Messages
    41,811
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top