Bafang M500 and M600 motors

Too close may also give erratic results. So just be aware of that. The manual says >5 and <25mm
sensor.PNG
 
Last edited:
⚡ EMTB Pro Go Pro — Living Intelligence Reports, exclusive discounts & ad-free Up to 25% off Peaty's, PEMBREE, Magicshine & more · Ad-free browsing · Pro badge See the deals →
Animalector said:
Too close may also give erratic results. So just be aware of that. The manual says >5 and <25mm
View attachment 66100
Click to expand...
Yeah from reading posts on here it seems to be more of an issue for M600 users, maybe the sensor input circuit Is less sensitive on M600 than on M500. Certainly with my M600 if I set the sensor-magnet gap to 25mm the signal is no good.
 
Thanks for all the feedback guys! I had previously tried moving the sensor / magnet for quite some time, trying different numbers of washers and alignment, all to no avail. Having seen all of your responses yesterday I thought I'd try again, initially I only managed to make it worse, weirdly until I turned the magnet 180 degrees then it seemed to fix the issue. I won't know if it's really fixed until I try some steep inclines. The current placement is closer than 5mm, I'd guess at more like around 2mm. Thanks again for all the feedback.
 
GandalfR said:
Thanks for all the feedback guys! I had previously tried moving the sensor / magnet for quite some time, trying different numbers of washers and alignment, all to no avail. Having seen all of your responses yesterday I thought I'd try again, initially I only managed to make it worse, weirdly until I turned the magnet 180 degrees then it seemed to fix the issue. I won't know if it's really fixed until I try some steep inclines. The current placement is closer than 5mm, I'd guess at more like around 2mm. Thanks again for all the feedback.
Click to expand...
If it occur one more time, replace the steel screw sensor fixation by one in alloy (non-magnetic). i'm curious to see if it's really solve the problem (working on mine)
 
GandalfR said:
Thanks for all the feedback guys! I had previously tried moving the sensor / magnet for quite some time, trying different numbers of washers and alignment, all to no avail. Having seen all of your responses yesterday I thought I'd try again, initially I only managed to make it worse, weirdly until I turned the magnet 180 degrees then it seemed to fix the issue. I won't know if it's really fixed until I try some steep inclines. The current placement is closer than 5mm, I'd guess at more like around 2mm. Thanks again for all the feedback.
Click to expand...
Great please let us all know how it is when you take it out for a proper ride
 
Hello Have a problem with the bike after 200km ...in the battery you hear clicking when put 'on' botton on the frame ...the volts are flikkering on the display ...anybody have some sort issue?
Already changed the battery and display ... nothing todo with it .Help appriciated (-:
 
Last edited:
Hondy said:
Hello Have a problem with the bike after 200km ...in the battery you hear clicking when put 'on' botton on the frame ...the volts are flikkering on the display ...anybody have some sort issue?
Already changed the battery and display ... nothing todo with it .Help appriciated (-:
Click to expand...
Hondy said:
Hello Have a problem with the bike after 200km ...in the battery you hear clicking when put 'on' botton on the frame ...the volts are flikkering on the display ...anybody have some sort issue?
Already changed the battery and display ... nothing todo with it .Help appriciated (-:
Click to expand...

Had some water just on the right side off the print after just 200km,internal protection IP65? ...so hopefully get some warranty !)-:
1625861922319.png
 
Neeko DeVinchi said:
Whilst I'm more familiar with the M400 and M620 Bafang motors, I have usually relied on, GreenBikeKits (GBK). I would send them an email to see whether they have spares of the M500/M600.
I'll leave a link to their website below and yes, they do ship to the UK.

Search results for: 'Bafang g330' BBS, ebike batteries, Bafang M620, Bafang M600, Bafang M500, Bafang M510, KT controller with display-GreenBikeKit.com

Greenbikekit is a professional electric bike kit manufacturer, e-bike battery building, Bafang BBS kit, Bafang m620 kit, Bafang M600 kit, Bafang M560 motor, Bafang M510, Bafang M200, Bafang M400, Bafang M420 repair, Baffang M300 repair, Bafang motor repair parts distributor, bafang M400...
www.greenbikekit.com www.greenbikekit.com
Click to expand...
Is that a EU retailer? (I'm from Sweden so us retailer get damn expensive in fees and tax, and what's the order to delivery times like, need a new controller after a f-up when try to connect a FDTI adapter to my stock m400....)
 
Roy68 said:
Great please let us all know how it is when you take it out for a proper ride
Click to expand...
...So I went out over the weekend and unfortunately the issue still remains. It's marginally better, in that it doesn't occur quite so often, but it's still a real issue. I've already switched out the sensor bolt to non-magnetic so that wasn't a fix for me. I've sent some more information over to Bafang and Melody and I'll wait to hear what they say...
 
cman72 said:
Is that a EU retailer? (I'm from Sweden so us retailer get damn expensive in fees and tax, and what's the order to delivery times like, need a new controller after a f-up when try to connect a FDTI adapter to my stock m400....)
Click to expand...
They're American but they do ship to EU countries as well as the UK.
I trust them as I've brought from them in the past. Just make sure you select the correct postal service for Sweden and if possible, buy more than one item (get spares for the motor like wire looms, displays, chainring, clutches etc).
Failing that, reach out to them via email. They do respond ??
 
Neeko DeVinchi said:
They're American but they do ship to EU countries as well as the UK.
I trust them as I've brought from them in the past. Just make sure you select the correct postal service for Sweden and if possible, buy more than one item (get spares for the motor like wire looms, displays, chainring, clutches etc).
Failing that, reach out to them via email. They do respond ??
Click to expand...
I did send them an email and they are located in China, and they did offer me swift DHL transport (1-3days) but then I have to pay tax and import fees but they had a German partner that act middle man to avoid fees but then it takes 7-10 days to Germany and 3-7days to Sweden.
Sorry fore the OT, but thanks for the tip on that trader.
 
I know it’s been mentioned somewhere in one of the many threads, but what is the tool for tightening the castellated nut that locks the drive spider on the M600 and where to get it from, thanks.
 
Por favor, en el conector triangular que es:
- Ánodo
- Cable de alimentación al controlador
- GND
- RxD
-TxD

conector triangular.jpg


Gracias
 
Waynemarlow said:
Thanks

Might just take a wee while to get here from Russia but I think its the same as a Shimano Hollowtech BB removal tool, can anyone confirm that ?
Click to expand...
To be clear, all these tools are same size, but only right hand one will work. Left hand one cannot fit in recess, and middle one is not deep enough. Hope that helps

IMG_20210714_160543.jpg
 
have you tried searching google, amazon or ebay for "YC-29BB"?
https : // www. amazon .co .uk/Yosoo-Health-Gear-Durable-Compact/dp/B08H554VZ2

remove the spaces as links don't work
 
Pyr0 said:
have you tried searching google, amazon or ebay for "YC-29BB"?
https : // www. amazon .co .uk/Yosoo-Health-Gear-Durable-Compact/dp/B08H554VZ2

remove the spaces as links don't work
Click to expand...
I must have typed in the wrong number in Amazon as I had tried there, now having gone back and retyped it, there's a few on there. Thanks.
 
Lucky Luke said:
[QUOTE = "patdam, publicación: 317481, miembro: 2521"]
View attachment 66451
[/CITA]
Another question
CAN H is Rx or Tx
CAN L is Tx or Rx

Thanks
Click to expand...
I'm not specialist but for i know Rx Tx are for UART protocol, M500/600 are in can bus

wiring to use CAN to usb converter and thread on the subject

Bafang M500/M600 thread - Page 16 - Endless Sphere (endless-sphere.com)

1626416817893.png
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    670K
    Messages
    41,156
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top