• Warning!!

    Riding a tuned or deristricted EMTB is not a trivial offence and can have serious legal consequences. Also, many manufacturers can detect the use of a tuning device or deristricting method and may decline a repair under warranty if it was modified from the intended original specification. Deristricting EMTB's can also add increased loads for motors and batteries. Riding above the local law limit may reclassify the bike as a low-powered bike, requiring insurance, registration and a number plate.

    Be aware of your local country laws. Many laws prohibit use of modified EMTB's. It is your responsibility to check local laws. Ignoring it, has potential implications to trail access, and risk of prosecution in the event of an accident.

    UK Pedelec Law

    Worldwide Laws

    We advise members great caution. EMTB Forums accepts no liability for any content or advice given here. 

Anyone derestricted the new Shimano EP8 yet?

Darren66

Active member
Joined
Mar 7, 2020
Messages
180
Reaction score
177
Location
uk
Sorry, thought I'd be the first to get in there...:)
 
⚡ EMTB Pro Go Pro — Living Intelligence Reports, exclusive discounts & ad-free Up to 25% off Peaty's, PEMBREE, Magicshine & more · Ad-free browsing · Pro badge See the deals →
Does anyone know if Shimano ep8 have any anti tuning hardware or software, like Bosch gen 4 motor??
 
Check that your circumference is set correctly, mine was factory set at 2360mm and the actual circumference of the tyre l measured at 2250mm

l changed it to the actual value and the speedometer is now within 1km of Strava on a 40km ride.
 
I've got it derestricted with stunlocker. Just have it at 32kmh at the moment. I haven't tried the circumference tuning yet as I like having an "accurate" speedometer.
For accuracy on my previous bike i aactually lowered the circumference by about 9% to give correct odometer, in turn you also get 9% more speed
 
That's exactly what l did, although l got about 5% more speed as mine wasn't so far out.

l could probably have adjusted that in the Shimano app as it has a setting for a +/- 5% speed adjustment

Every little helps !!
 
What about Stunlocker, the guy says he's now updated his own software so you don't need to do a motor software downgrade in order to get it to work.
 
I've got it derestricted with stunlocker. Just have it at 32kmh at the moment. I haven't tried the circumference tuning yet as I like having an "accurate" speedometer.
It probably isn't accurate now - mine isn't.
 
That's exactly what l did, although l got about 5% more speed as mine wasn't so far out.

l could probably have adjusted that in the Shimano app as it has a setting for a +/- 5% speed adjustment

Every little helps !!
That shitty adjustment in the shimano app only changes the speed displayed. It doesn't effect distance recorded or actual assistance speed or anything else of any use.
 
Last edited:
My wheel circumference was 10cm out, it was (as always) set too large.
l adjusted it to the correct value using Stunlocker.
Now, the bike speedometer is within 0.5 miles of my GPS on a 20 mile ride.
Yesterday's ride was according to Strava 21 miles and according to the bike 21.4 miles.

Before l adjusted it, the bike would tell me l had done 22 miles on this ride.

lt's not a big difference, but it's nice to get it more accurate.
And l guess the bike will be a little bit faster too, not that you'd notice such a small difference!

But l've paid for 15.5 mph and l want 15.5mph, not 14.9
 
I tried ST Unlocker but my EP8 firmware isn't supported apparently
Did you get it to work? I just downloaded the App and it won’t connect to my bike…wondering if it’s because the EP8 firmware (bike shop updated it w/o me knowing 🤦🏻) is most recent version
 
Check that your circumference is set correctly, mine was factory set at 2360mm and the actual circumference of the tyre l measured at 2250mm

l changed it to the actual value and the speedometer is now within 1km of Strava on a 40km ride.
You do realise tho that you might have blown your warranty with doing this as I did the same and was told that it voided the warranty. Only hearsay but just something to think about and maybe checkout before doing it.
 
Yes l realise that could be the case. Although l've only set it to the correct circumference and not a false setting to trick the ECU into making the bike faster.
 
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    672K
    Messages
    41,407
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top