Just returned my bike to dealers as it dropped from 2 bars to nil and then no power.
When I got back home the battery would not charge.
Diagnostics came up with no error code son control unit. Internal drive unit software error 12v over voltage.
Undervoltage error in drive unit and external short circuit or battery too low to start.
The biggest concern was corrosion to the terminals connecting charger plug and battery which to me seems like a design fault. The dealers solution was try to avoid the bike getting too wet. Its a mountain bike! I never use a pressure washer and just spray with muck off and wash with garden hose on shower setting. The bike is dried off with towels before going back in the garage to be charged.
Has any one else suffered these problems. My bike has covered almost 1500 miles.
Thanks
When I got back home the battery would not charge.
Diagnostics came up with no error code son control unit. Internal drive unit software error 12v over voltage.
Undervoltage error in drive unit and external short circuit or battery too low to start.
The biggest concern was corrosion to the terminals connecting charger plug and battery which to me seems like a design fault. The dealers solution was try to avoid the bike getting too wet. Its a mountain bike! I never use a pressure washer and just spray with muck off and wash with garden hose on shower setting. The bike is dried off with towels before going back in the garage to be charged.
Has any one else suffered these problems. My bike has covered almost 1500 miles.
Thanks