Levo Gen 2 Which freehub driver do I need for SRAM Eagle NX cassette?

super_claret

Active member
Joined
Aug 21, 2019
Messages
208
Reaction score
47
Location
North Yorkshire
I’m a bit confused (doesn’t take much😀). I want to change my Nukeproof Horizon V2 from SRAM XD driver to be able to use the SRAM Eagle NX cassette but not sure whether it’s the Shimano HG or Microspline. I think it’s the Shimano HG I need but would be grateful of any advice
 
⚡ EMTB Pro Go Pro — Living Intelligence Reports, exclusive discounts & ad-free Up to 25% off Peaty's, PEMBREE, Magicshine & more · Ad-free browsing · Pro badge See the deals →
No change required. If you have an XD driver now, you need a couple tools to swap the current cassette to a new one.

What make cassette is on the wheel now?

How does a SRAM Eagle NX cassette possibly fit on to a Shimano HG driver? It doesn't!

Driver pics here.
 
No change required. If you have an XD driver now, you need a couple tools to swap the current cassette to a new one.

What make cassette is on the wheel now?

How does a SRAM Eagle NX cassette possibly fit on to a Shimano HG driver? It doesn't!

Driver pics here.
SRAM website states the NX cassette needs a Shimano driver, presumably because they think they are stronger than XD drivers, especially as they state that the NX cassette is made for eMTB. My confusion arose from the fact that it didn’t mention Microspline or HG
 
OK HG it is! Shame on me.

"The NX cassette uses Shimano’s HyperGlide (HG) freehub body instead of SRAM’s XD Driver found on the rest of the brand’s 12-speed cassettes. This means the cassette’s range is only 11-50t compared to 10-52t for the more expensive XD versions."
 
Keep reading
    Browse all

    Community Stats

    Since 2018
    676K
    Messages
    41,982
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top