Welcome to YT Industries official on the forum

[Rob Rides EMTB]

Just a quick note to say welcome to @YT-Industries-UK who are an official YT account from the brand, represented here on the forum.

Cheers for joining and great to have you here!

 

[Radixxx]

I wish to have an company member as well in German forums. It is always beneficial to get direct customer feedback and improval ideas.

The Decoy ist a great bike to drive, gives a safety feeling in so very difficult trails - and honestly to say, I love it for this skills.

I'm interested to know if YT ist thinking about an electric supported light-enduro. It is one of the things where I could get weak to buy them.

 

[Tubby G]

I wish to have an company member as well in German forums. It is always beneficial to get direct customer feedback and improval ideas.

The Decoy ist a great bike to drive, gives a safety feeling in so very difficult trails - and honestly to say, I love it for this skills.

I'm interested to know if YT ist thinking about an electric supported light-enduro. It is one of the things where I could get weak to buy them.

I’m placing my bet on Orbea putting an EP8 RS in their Rallon, coming soon in 2022 I reckon

 

[Sapientiea]

Could be good, we will see. Welcome! and come say hello in the YT threads

 

[Enon]

Welcome @YT-Industries-UK !

 

[Hale_Storming]

Hi everyone,

I have a YT decoy elite and I need to replace my rear hub bearings. I have the industry nine hubs that come as standard. Can anyone advise which bearing set I need?

Thanks,
Luke

 

[DNE87]

Hi everyone,

I have a YT decoy elite and I need to replace my rear hub bearings. I have the industry nine hubs that come as standard. Can anyone advise which bearing set I need?

Thanks,
Luke

1/1 or Hydra rear hub?

 

[Talltexan]

My elite used # MR 15307 LLU/LLB. 15x30x7mm
Please post if the brake side bearing fits loose in the hub. I had to use green Locktite between the hub and bearing race.
I purchased the bearings from endurobearings.com

 

[Hale_Storming]

1/1 or Hydra rear hub?

Hey thanks for your reply, Im pretty sure its a 1/1 mircro spline rear as detailed on the linked website: 2022 YT Decoy MX Elite E-Bike

 

[Hale_Storming]

My elite used # MR 15307 LLU/LLB. 15x30x7mm
Please post if the brake side bearing fits loose in the hub. I had to use green Locktite between the hub and bearing race.
I purchased the bearings from endurobearings.com

Hey, thank you for the advice, I've spent a while searching the net trying to find what size/quantity bearings i need. I think i need:

2 x 15307A3
2 x 61802A3
1 x 152610A3

Is this what you had in your rear hub?

Thanks!
Luke

 

[Talltexan]

I only replaced the two main axle bearings. I did not replace my cassette/freehub bearings so not sure on the other bearing numbers.

 

[Hale_Storming]

I only replaced the two main axle bearings. I did not replace my cassette/freehub bearings so not sure on the other bearing numbers.

Okay, so i have just ordered the same bearings, i will let you know how they fit. How long have your new bearing lasted up to now?

I need to replace mine after just 1k miles.

 

[Talltexan]

About the same for me on miles. 2 seasons so replacement was expected.
The Decoy has been such a solid, reliable bike.
So capable in the steep stuff!
Good luck with the bearing replacement.

Mark