The Shit Flap - Canyon Strive ON

Hi everyone. I've been asked by lots of members of this forum and the EMTB Strive:ON Facebook group if there'll be another production run of the Shit Flaps.
Is there anyone that missed out last time that would like me to produce a new batch?
 
⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
This is the one I made for my Rise just over 2 years ago. It is still on there and hasn't needed to be touched since. And still running original main bearings, even though I am on my 3rd set of all the other bearings on the frame after 4000km. Sorry its a poor picture but basically cut from 2mm rubber sheet and cable tied to the seat post abobe charge port and also to the seatstay bridge.


IMG_20220305_164259.jpg
 
Refer to my previous question I just find more info on your web!
Do you have any idea when it is available again?
 
This can be done DIY in moments with some duct tape, but good luck with this venture.

Next version should be wider, for more effective coverage.
 
The final batch of Shit Flaps are on the laser cutter as I type. They will be a MKII version that covers the lower bearings too. There will be 45 in this run. Once they're gone that'll be it. To keep things fair for everyone I will post a link in a fresh post on the EMTB forum as soon as they are live and available to order. Made from the same 2mm tough rubber and laser etched with the Shit Flap logo. Attaches to the frame with 3M HB adhesive tape.
 
CrispyDesigns said:
The final batch of Shit Flaps are on the laser cutter as I type. They will be a MKII version that covers the lower bearings too. There will be 45 in this run. Once they're gone that'll be it. To keep things fair for everyone I will post a link in a fresh post on the EMTB forum as soon as they are live and available to order. Made from the same 2mm tough rubber and laser etched with the Shit Flap logo. Attaches to the frame with 3M HB adhesive tape.
Click to expand...
You get anywhere with the Rise mate ?
 
CrispyDesigns said:
The final batch of Shit Flaps are on the laser cutter as I type. They will be a MKII version that covers the lower bearings too. There will be 45 in this run. Once they're gone that'll be it. To keep things fair for everyone I will post a link in a fresh post on the EMTB forum as soon as they are live and available to order. Made from the same 2mm tough rubber and laser etched with the Shit Flap logo. Attaches to the frame with 3M HB adhesive tape.
Click to expand...
Can you post a photo please mate? Will be interested in what the MK2 version adds exactly.
 
RJUK said:
Can you post a photo please mate? Will be interested in what the MK2 version adds exactly.
Click to expand...
Here's picture that shows the profile difference. Basically adds extra coverage to the bearings between the frame and seatstays:

Screenshot 2024-09-11 at 13.58.43.png
 
Many thanks for all the orders. Sold out in an hour and a half! I’ll be packing and posting them all out over the next day or so
Cheers
Christian
 
You must log in or register to reply here.
Keep reading
    Browse all

    Community Stats

    Since 2018
    669K
    Messages
    40,832
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top