Hello,
i have a problem: i have put a rotor XT MT800 203mm on front and here is no problem, but on the rear i have now a 180 rotor same XT 800 but with the magnet on center lock:
i think is not compatible with my Orbea Rise H30 2022, i have a error W101 because there's no speed signal.
I do not want to trash the 180 rotor, how can resolve this? where can buy a magnet center lock compatible with my ebike?
Thanks
Railgods,
The Shimano speed sensor pickup mounted on the Orbea Rise non-drive side chain stay is
really sensitive correct magnet positioning on the brake rotor. The error code you are receiving, is a result of the Speed sensor pickup not reading the rotor magnet correctly.
When I first bought my Rise M20, I modified the brakes and experimented with several non Shimano brake rotors. None of these brake rotors had a built in magnet mounted on the brake rotor. I tried/bought multiple centerlock lock ring magnet adapters. None worked and I experienced the same error codes you are getting.
I also tried gluing a magnet directly to the steel rotor. This worked, however the high heat which a brake rotor generates during braking over heats the magnet and causes it to loose magnetism. When this occurred, my Rise would throw an error code and shut down. Once the magnet cooled down, my Rise would work again. If the magnet is exposed to enough high heat cycles, it will permanently damage the magnetism. You can glue a magnet to a brake rotor, however the magnet needs to be insulated or not have direct contact with the steel brake rotor itself. In other words you can glue the magnet to the alloy spokes on a Shimano XT brake rotor.
Eventually, I grew tired of experimenting with brake rotors and my Rise fault coding. I went back to using Shimano XT brake rotors. With my body weight and the terrain that I ride, I go through brake rotors fairly quickly. Shimano XT EM800 rotors with built in magnets are expensive. To save money, I would buy Shimano XT MT800 non magnet brake rotors and convert them to a XT EM800 magnet rotor. The conversion process is fairly easy to do, however you will need a Shimano magnet assembly removed from a worn out EM800 brake rotor.
Here is the link to a tech article I wrote on the procedure:
Hello, This tech article will describe how to convert a Shimano "Non-Magnetic" RT-MT800 center lock brake rotor into a "Magnetic" RT-EM810 brake rotor. I hope you find this article useful. If your bike has Shimano brakes, you will have likely noticed there is a shortage of Shimano brake parts...
www.emtbforums.com
If your interested, I also did a three part tech series on maintenance and modify Rise Shimano brakes
This will be a three part technical article discussing Shimano braking system components, how to service your Shimano brakes and brake system modification on your Rise. Part # 1 will discuss basic maintenance on your Shimano brakes. Part # 2 will discuss brake modifications to your Orbea...
www.emtbforums.com
This technical article is the second installment in a two part series on Shimano brake systems. Refer to “Part # 1: Shimano Brake System Service”, for information on bleeding and servicing Shimano brakes and brake pad compounds...
www.emtbforums.com
After submitting Part # 1 and Part # 2 of the tech series on Shimano brakes, I realized I had not included anything on checking your Shimano brake rotor for minimum thickness or signs of uneven rotor wear. You can review Part # 1 and Part # 2 in the series here...
www.emtbforums.com
i think is not compatible with my Orbea Rise H30 2022, i have a error W101 because there's no speed signal.
