How to install bigger chainring on bike with poor chainstay clearance.

yatayata

New Member
Feb 6, 2022
36
6
Genova
I have a focus Thron2 and I have really low space to fit a bigger chainring, actually I have a 34.
I’m trying to figure out if I can simply use direct mount and go with e-thirteen 36 chainring or should I go with a spider 104 and apply chainring on it. I’ve tried to search on internet info about chainline of the boost spider version but i haven’t found anything...
I need 52/53 boost chainline.
 

Philly G

Well-known member
Subscriber
Jun 29, 2020
692
517
New Zealand
It can be done, using a spider and 104bcd chainring, you might find this thread useful
 

Mikerb

E*POWAH Elite World Champion
May 16, 2019
6,174
4,696
Weymouth
What exists? Bosch Gen4 + direct mount? SRAM or Shimano . 12 speed? Eagle?

Assuming you have a boost rear hub ( 148mm) your existing chainwheel set up with be 3mm offset ( 52mm). It is possible to get 6mm offset for Bosch Gen ( which is ISIS) , which is designed for super boost rear hub and that may povide the chainstay clearance you need but at the expense of a more extreme chainline in the lower gears on a normal boost hub.
 

yatayata

New Member
Feb 6, 2022
36
6
Genova
What exists? Bosch Gen4 + direct mount? SRAM or Shimano . 12 speed? Eagle?

Assuming you have a boost rear hub ( 148mm) your existing chainwheel set up with be 3mm offset ( 52mm). It is possible to get 6mm offset for Bosch Gen ( which is ISIS) , which is designed for super boost rear hub and that may povide the chainstay clearance you need but at the expense of a more extreme chainline in the lower gears on a normal boost hub.
actually i have slx shimano 12, i understand what you mean and onestly i never use the first 3 sprockets, could be ok using 55 mm of chainline with a chainring with 55 chainline?
 

Gary

Old Tartan Bollocks
Author
Subscriber
Mar 29, 2018
10,496
10,692
the internet
1646346937309.png

😜
 

Mikerb

E*POWAH Elite World Champion
May 16, 2019
6,174
4,696
Weymouth
actually i have slx shimano 12, i understand what you mean and onestly i never use the first 3 sprockets, could be ok using 55 mm of chainline with a chainring with 55 chainline?
I would think it would be OK for the highest 8 or 9 gears.
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

526K
Messages
25,998
Members
Join Our Community

Latest articles


Top