How have you personalised your Vitus ?

[StuE]

Only the frame,battery, seatpost and brakes are original on my Esommet (and front caliper is a Magura) so what have you changed on yours ?

 

[gtaadicto]

I have changed:
-Rear rim: WTB -> Spank Oozy 395+
- dropper post: brand x ascend -> Bikeyoke revive 160mm
- front chainring: shimano 34t -> deckas 34t
- stem: vitus 50mm -> spank spoon 40mm
- ergon ge1 evo slim grips
- new debonair 2021 air spring upgrade

 

[StuE]

I have changed:
-Rear rim: WTB -> Spank Oozy 395+
- dropper post: brand x ascend -> Bikeyoke revive 160mm
- front chainring: shimano 34t -> deckas 34t
- stem: vitus 50mm -> spank spoon 40mm
- ergon ge1 evo slim grips
- new debonair 2021 air spring upgrade

Did the new air spring make a noticeable difference? My forks will need a service soon and I'm thinking of dropping the travel back to 170mm

 

[gtaadicto]

Did the new air spring make a noticeable difference? My forks will need a service soon and I'm thinking of dropping the travel back to 170mm

Yes it made a difference because the old spring was somehow defective. The new one sits higher in the travel and doesn't have travel loss

 

[Gary]

Covered the ugly green paint with black carbon vinyl.
Blocked/sealed the poor motor sealing.
Changed drivetrain to 36t ring 11-36 10 speed deore cassette/zee mech&shifter
Fitted a 170mm dropper.
Removed display and replaced with EN-EW100
Tubeless exos.
Mudguards. Garmin and light/GoPro bar/stem mounts
Fitted saddle, pedals and grips to pref choice (as with all bikes)
Oh and eleventysix motor replacements. ?

 

[Shjay]

Everything ?

 

[InRustWeTrust]

I have changed

Handelbar with moore rise
50 mm stem
Tubeless Michelin e-wild Tire
Other dropper regulate.

 

[davosaurusrex]

I have left from original:

Frame (with black pivot hardwear)
Shock (with megneg)
Forks (with 2021 air spring)
Brakes (with different rotors)

That's it! Such a saddo I've even spent hours hand cutting stickers for the rims....

 

[Shjay]

I basically had everything for full build minus frame so when bike came straight in stand, wheeels, bar, stem & grips & shifter came off had a 10speed Saint shifter as my Vitus is base model
Put own wheels on as build all my own
Joystick stem & bar
Deathgrips
Removed forks put on some custom devilles so could ride whilst I did a Smashpot conversion on forks
After year riding have now gone 11speed & mullet with manitou Mezzer fork
brakes are MT5 with Fabio levers

 

[thebarber]

I rode mine but naked just to mark my ground, feremones etc.

 

[KarlosBoro]

Hope brakes, renthal bars, custom printed fox decals and a nice new dropper lever