Decal on the amflow
- Thread starter rsyed
- Start date
tehviking
Active member
I have the silver one and that’s paint, not decals. Not sure how they do the gold but I’d assume it’s similar.
I bought some decals from invisiframe to cover the logo and match my accent color. It might be cool to do very dark gray on black?
I bought some decals from invisiframe to cover the logo and match my accent color. It might be cool to do very dark gray on black?
- Thread starter
- #3
thanks for the info, particularly with regard to the decals from invisiframe.
i would definitely do dark gray on black. Have you applied the decals to your bike? do they come in individual letters or in one block? what is the quality like?
i would definitely do dark gray on black. Have you applied the decals to your bike? do they come in individual letters or in one block? what is the quality like?
tehviking
Active member
Decals should arrive today or tomorrow. The bike is actually at RideWrap in Golden, CO getting vinyl wrapped, and I’ll put the decals over that. Will post pics once I’ve done it.
I did exactly this setup on my Fuel EXe and the decals were high quality, individual letters, and survived a very tough year of hard riding and multiple crashes.
I did exactly this setup on my Fuel EXe and the decals were high quality, individual letters, and survived a very tough year of hard riding and multiple crashes.
tehviking
Active member
I think the decals turned out great.
I got 3 downtube sized big decals. And 3 smaller ones, about the size of the one on the chainstay.
Last edited:
Upgraded or new FOX36?
Upgraded the cartridge to X2 - good spot
how much is such an upgrade and is it worth?
Pentti
New Member
They are decals, I went for the stealth look, black letters all came off OK using heat an/or Isopropanol IPA (I got scared using heat on the down tube as the battery is inside).
Pentti
New Member
NOT SO! They are individual stickers
I would not have thought it possible to wrap something with such complex as a bike frame. I am amazed.
singletrackminded
Active member
the stock Amflow decals on my frame are under the clearcoat and not removable. I bought the silk custom decal kit and it is an exact fit! nice product.
D
Deleted member 45485
Guest
To share with the Amflow 'pimp my ride 'club
For my design, no expensive suspensions, I'm happy with them for the moment.
I bought decals from SilkGraphics, the Fox36 stickers are 'Noname' from Amazon (or from Aliexpress), they are all very good, and all the red pieces including a carbon adhesive roll from Ali, everything for less than 150€. Of course with a lot of work to create the general design the way I wanted it, measuring and cuting the carbon shapes during several days. I hope it will give you ideas guys
et voila!
For my design, no expensive suspensions, I'm happy with them for the moment.
I bought decals from SilkGraphics, the Fox36 stickers are 'Noname' from Amazon (or from Aliexpress), they are all very good, and all the red pieces including a carbon adhesive roll from Ali, everything for less than 150€. Of course with a lot of work to create the general design the way I wanted it, measuring and cuting the carbon shapes during several days. I hope it will give you ideas guys
et voila!
Last edited by a moderator:
singletrackminded
Active member
I have gone for a low key graphics with my trail bike bike build, complete w/ upgraded parts including I-9 custom carbon wheels, Schwalbe Albert 2.5 Radial tires, Fox 38 Factory Limited fork(British Racing green), Formula Cura 4 brakes, One Carbon handlebar, I-9 stem. Respectible 21.2 KG w/ 800w battery. Looking forward to the 600w battery option to drop another KG of weight. I dont need 800w for the majority of my rides.
Last edited:
sethimus
😠 Donald Duck 😠
you are way up there with the golden boyTo share with the Amflow 'pimp my ride 'club
For my design, no expensive suspensions, I'm happy with them for the moment.
I bought decals from SilkGraphics, the Fox36 stickers are 'Noname' from Amazon (or from Aliexpress), they are all very good, and all the red pieces including a carbon adhesive roll from Ali, everything for less than 150€. Of course with a lot of work to create the general design the way I wanted it, measuring and cuting the carbon shapes during several days. I hope it will give you ideas guys
View attachment 170639
View attachment 170640
View attachment 170641
et voila!
D
Deleted member 45485
Guest
I like the Golden boy one too, by the way
I'm Italian too. We love our Gold .......I like the Golden boy one too, by the way
Lencho
Member
This thread inspired me. Tried to purchase a grey similar to the Zeb's
Did a grey similar to the Zeb.
Purple parznip
Active member
That looks horrendous.To share with the Amflow 'pimp my ride 'club
For my design, no expensive suspensions, I'm happy with them for the moment.
I bought decals from SilkGraphics, the Fox36 stickers are 'Noname' from Amazon (or from Aliexpress), they are all very good, and all the red pieces including a carbon adhesive roll from Ali, everything for less than 150€. Of course with a lot of work to create the general design the way I wanted it, measuring and cuting the carbon shapes during several days. I hope it will give you ideas guys
View attachment 170639
View attachment 170640
View attachment 170641
et voila!
I see you have the SDU rear shock. How do you like it and is it the standard tune? I’m doing a similar setup on mine.
Lencho
Member
It is standard tune. I like it stock, but do plan to test some tweaks. The Zeb Ultimate is a standout like the avinox motor is.
Good to hear! Is your Zeb a 170mm?
Similar Threads
-
-
Amflow Carbon Pro 2025 mullet conversion (29x27.5) to fix fit for 5'5" rider?
- Started by EdK
- Replies: 4
-
Decision between Amflow PX Pro, Pivot Shuttle AM and Pivot Shuttle AMpd.
- Started by Bearfist
- Replies: 18
-
-