Amflow light connector

[e_1]

Since the amflow tcu has a service port enabled for light, I did my own connector using a male micro A plug glued to head tube right cable port of the frame.

 

[elliot330]

neat, but trying to find that Higo connector in the UK is impossible, for me anyway

 

[andyb2]

View attachment 169344

He seems happy about it

 

[e_1]

neat, but trying to find that Higo connector in the UK is impossible, for me anyway

Bought them in Germany

 

[Pentti]

Yes, from Germany here.......... HIGO Micro-A series
He is very helpful/quick & cheap BUT - be quick he's retiring/selling-up 31st October
Also, looks like Female is out of stock now.
From pics OP glued a female connecter into the bike housing

 

[preedy62]

neat, but trying to find that Higo connector in the UK is impossible, for me anyway

I’ve ordered one from Germany ( link below) but the site closes down on the 31st October so you’ll have to be quick.

HIGO-S4-MX

HIGO-S4-MX HIGO Micro-X Serie HIGO Mini-X male connector, 4-pole, 4 x 0.08 mm²

shop.e-bike-technologies.de

 

[preedy62]

Since the amflow tcu has a service port enabled for light, I did my own connector using a male micro A plug glued to head tube right cable port of the frame.

View attachment 169342 View attachment 169343 View attachment 169344 View attachment 169345 View attachment 169346 View attachment 169347 View attachment 169348

Do you control the lights via the right wireless controller?

 

[eDirt]

I have that exact light on my Rise but haven’t had a chance to move over to my Amflow yet. Does that aux port actually have enough voltage to fully power the light? I saw someone in another thread mention it was lower.

 

[e_1]

Do you control the lights via the right wireless controller?

Yes, the right one. Down button, long press.

 

[e_1]

I have that exact light on my Rise but haven’t had a chance to move over to my Amflow yet. Does that aux port actually have enough voltage to fully power the light? I saw someone in another thread mention it was lower.

The light is coming from my previous ebike (mondraker crafty) and it seems to have the same power.

 

[eDirt]

OK, you’ve inspired me. I dropped the motor on the Orbea to disconnect the wire and pull it from the down tube. Just need to find a connector to fit the Avinox now.

 

[e_1]

I b

OK, you’ve inspired me. I dropped the motor on the Orbea to disconnect the wire and pull it from the down tube. Just need to find a connector to fit the Avinox now.

I bought it here:

AMFLOW LICHTANSCHLUSSKABEL CABLE LIGHT HIGO Z 405 LICHTKABEL

cypress-warehouse.com

 

[eDirt]

I b

I bought it here:

AMFLOW LICHTANSCHLUSSKABEL CABLE LIGHT HIGO Z 405 LICHTKABEL

cypress-warehouse.com

It’s nice that that vendor lists directions of how to set it up. Unfortunately for me they won’t ship to the US. So far googling around I’ve had no luck finding a vendor that will. The original Higo spec sheet for the part:
https://www.higoconnector.com/en/pdf/productSheet/z405mmp00h21000

 

[nrgbod]

Can't find anyone to send one to the UK either unless you order 300 of them from Higo.
I'm almost ready to cut the plug off the back of the display and solder in a more readily available connector.

 

[curufinwe_wins]

It’s nice that that vendor lists directions of how to set it up. Unfortunately for me they won’t ship to the US. So far googling around I’ve had no luck finding a vendor that will. The original Higo spec sheet for the part:
https://www.higoconnector.com/en/pdf/productSheet/z405mmp00h21000

If you ever find someone before the avinox official version of the M99 mini comes out, definitely post here, I'm searching myself.

 

[eDirt]

No luck going through Amflow themselves.

Dear Customer,

Thank you for reaching out to us.

We’re sorry to inform you that Amflow does not currently stock this specific part as an official spare. However, any standard Higo Z405M Female extension cable should be compatible.
We kindly suggest checking with other accessory suppliers for availability. Thank you for your understanding.

If you have any other questions or need further assistance, please don’t hesitate to let us know.

Thank you for choosing Amflow. Wishing you a nice weekend.

Best regards,
Amflow Customer Support

 

[dadeadduck]

I’ve ordered one from Germany ( link below) but the site closes down on the 31st October so you’ll have to be quick.

HIGO-S4-MX

HIGO-S4-MX HIGO Micro-X Serie HIGO Mini-X male connector, 4-pole, 4 x 0.08 mm²

shop.e-bike-technologies.de

This isn't the right connector for the Amflow head unit.

It's needs the Z405MM

 

[preedy62]

The light is going to be available in Europe later this year

See

https://www.amflowbikes.com/uk/product/amflow-smart-front-light-combo?from=pages-after-sales-accessories&vid=199521&fbclid=IwZnRzaANxZe9leHRuA2FlbQIxMQABHoc1-QOPQ0oxjhSGwq61L88lVfT_Eq4OCoJ2B1xLEvdxOZ4AB3i2E_GXCByT_aem_h5KZsBm6CMViL3rDfHxcIw

 

[daytrader]

The light is going to be available in Europe later this year

See

https://www.amflowbikes.com/uk/product/amflow-smart-front-light-combo?from=pages-after-sales-accessories&vid=199521&fbclid=IwZnRzaANxZe9leHRuA2FlbQIxMQABHoc1-QOPQ0oxjhSGwq61L88lVfT_Eq4OCoJ2B1xLEvdxOZ4AB3i2E_GXCByT_aem_h5KZsBm6CMViL3rDfHxcIw

was available in the meantime sold out

 

[dreys]

Wait for Outbound to release theirs. Much-much better light vs generic Avinox.

 

[curufinwe_wins]

was available in the meantime sold out

Meanwhile europe could already get the connector and north america cant get either sigh