Search results

I guess cadence is important? .

Yes it is a tight fit and needs fine tuning and alignment when installing new pads. Breaking is very good and will not go back to 200mm.

I used Noah and Theo located in the UK. The pads have been great and the price is the best thing. https://noahandtheo.co.uk/

Yes fully retracted. I Will need to play around to find the best alignment.

Today I installed a Magura MDR-P 220 rotor and new pads to my SLX 4 piston caliper/Lyrik fork/Levo 2020 alloy. Used a QM 45 adaptor I have had difficulties trying to align. No too much tolerance. It seem that at times the pads touch the rotor and it transmits a vibration to the handle bars...

Is it possible to install 220mm rotor on the rear of my levo and which is the required adaptor?

Updated without problems today and went for a short ride to test. All well and walk mode works much better than before. Proper ride over the weekend.

What screw (OEM) do you use? Same as original or different?

Thanks to everybody that commented and Specialized for sending the screw/bolt, no problems installing and ready to ride Dunkeld tomorrow.

I have just been on the phone with known independent Specialized dealer. They have told me that this problem does happend. All shock bolts and linkage bolts should be check very often in ebikes. When they have no stock of this screw/bolt the solution the has been to use a M6 bolt partial...

Mikerb thanks for the clarification if it is a bolt or screw. I found this link in this forum. Best Bike. They refer as it being a screw. https://webshop.bestbike.de/us/specialized-sub-my19-sj-levo-fsr-j1-rear-shock-har.html

Update; I contacted the LBS where I bought the bike and they contacted Specialized. Specialized came back and said that I or Specialized dealer should take the stub out. My worry is the warranty. LBS did not offer to remove the stub until I asked them. In view that I was on my own I contacted...

I did watch these videos last night and there are a few techniques to extract the bolts with the correct tools. I'm sure that they will be able to do so but there is always a risk and this has been shared by other people were in the process of extraction the threads have been damage and...

No gnarly drops just trail riding. As everybody else has mentioned before there are a few things that may have happened to cause the bolt to snap but the bottom line is that the bolt snapped and part of it is in the frame. As you also mentioned if there was a nut on the other side that would...

I have alu frame not carbon. Will update once LBS gets in contact.

Just want to make everybody aware who has a Levo to check the shock bolt. I have a 2020 Levo which has 1 year with a RockShox Deluxe, came with the bike. Today riding after a small drop I heard something break, did a quick check but could not see anything wrong and thought it might have been...

Hi All need some recommendations on who can service a SRAM fork and shock in Scotland. Thanks.

My Levo 2020 came with Sram Level T brakes. Really bad brakes so I bought Shimano SLX M7120, they have excellent stopping power and work all the time, good quality, easy to service and not too expensive.

Check this website. I have one on my Levo 2020. Levo is not the easiest to fit a mud guard. The sicomtb mud guard protects to a certain degree. https://www.sicomtbproducts.com/

Unless Mission control when app updated to do firmware update it reset acceleration to zero.