I recently did a lower leg service on my Lyrik fork and didn't find any crush washer used as shown in the Rockshox parts diagram. The air shaft side didn't have any washer and the damper side had a large 8mm washer that was not the thicker smaller OD crush washer. I looked at this video...
I just noticed this today on my 2021 Sl Expert with about 1500 miles on it. When I backpedal there's a dry sort of whistling sound coming from the motor. I just noticed this while lubing my chain and not pedaling. It's pretty consistent and not really loud but noticeable. I think I would...
I decided to install Shimano 203mm rotors on my Tubo Sl that has code r brakes. I just could not get the centerline rotors to perform quietly. I used a 1.5mm shim to account for the 200 to 203mm rotor diameter difference. I had an RT66 that was made in Japan that I used for the front and have...
Picture
Bike / Product Year: 2021
Manufacturer Fox
Model Fox 36, 150mm, 29" Boost, Grip2 fork and matching dpx2 210mmx52.5mm shock
Asking Price $800. USD for the fork and $400. USD for the shock OBO
Location San Diego, California
Description These Fox components came off my 2021-2...
Conventional wisdom says if you used the larger Shimano rotor on a Sram brake then you need to add a washer equivalent to the difference in diameter/2. That would be a 1.5mm washer to go from a 200mm rotor to the Shimano 203mm rotor using the existing Sram 20mm mount (for an existing 180mm...
I have this posted in the Specialized section but thought I would add a link here. I know that SRAM brakes have a bit of a bad rep with many of us and I can't say I love the use of DOT fluid or the involved bleeding procedure. But I've come to learn to be better at it and I currently don't...
Does anyone know if the speed limitation resides in the motor or the controller? Will a motor from Europe work in a USA bike and provide support up to 20 mph? I don't see any motors available here in the USA but many on ebay from Europe. Seems like the Jam2 battery can be ordered from Italy...
Bike / Product Year: 2018
Manufacturer: Focus
Model: Jam2 Carbon
Size Medium
Asking Price: $3900 USD
Location San Diego California
Description This is for local deliver. My Jam2 was purchased April 2019 and I am the original owner. It has some mods that I will share with you if you are local...
The bike I just bought clearly says class 3 28 mph on the tag below the shock. Other differences from the 2021 spec are shimano wheels and cassette…I do not want a class 3 bike,,,seller did not say anything about this and their receipt ddi not say class 3
thewheels are heavier th@n the dt...
OK, I admit I am no long 5'8" at age 72. I am officially 5' 7". Stretch is only 5' 4" or a negative ape index of -3". Inseam is only 30". Stand over on my medium jam2 is "painful", lol. Medium mullet with 2.6" tires and 150mm forks gives me 1205+mm wheelbase, std long 457mm stays and a seat...
Today I was going to drive 150 miles to pick up my used 2021 Specialized Levo SL Expert. I was very excited about this but wanted to insure I had the remaining 1 year plus warranty on the battery, motor and TCU. A failure of those is very expensive. A trip to my local dealer (took two trips)...
Any fellow Focus owners that either also ride a Specialized SL or that have outright switched? I'm looking at getting a 2021 Levo Sl Expert carbon. This one comes withdpx2, fox 36 Grip2 forks, 200mm brakes front and rear and is going to cost me $7300., perfect condition, transferrable...
I'm getting bit frustrated trying to find a 210x50/55mm dvo Topaz t3. I have found an 8.5"x2.25". That would change the travel form 140mm to 145mm. It would also raise the back of the bike about 6mm. As is stands I've lowered the back of my 2018 plus Jam2 using a 2.6" instead of the 2.8" and...
I have no idea if this Crane Creek shock will work on my Focus. It comes with a spring but I don't know 1) if this will fit and 2) if the spring is going to be even close for my bike and weight. Anyone have any experience with this? I'm so tired of waiting for the DVO Topaz...now Dec 2021 or...
There are only two emtn bike choices in the USA if you want a bike with a Fazua motor, Bulls and Trek. Both are short travel, steep fork angle, XC bikes and probably not big sellers here. I would never want to ride one of these on some of the technical sections I encounter here in SoCal. I...
Summer riding will be long over before the Topaz is delivered in the US. I do see some 210x55 Jade shocks available. Has anyone tried this on a Jam2 (2018 CF, medium?)
I've been running a set of wheels given to me. Front is 29" CF Exile and back is 27.5, 35mm exile+ aluminum. I've changed the freewheel once in about 1 1/2 to 2 years of riding and I noticed many hub cracks the other night. 11 out of 32 spokes holes on the drive side are cracked. The spokes...
Has anyone seen this video yet? Looks like small cables and crank arms have to be changed on the ep8 (if you can get it) from the e8000. And EP8, depending on where it comes from might be restricted to 15mph VS 20 mph for the States. Is this even available in the US yet? And of course you...
I have a friend with a 2019 PF 7 that wants to install a 29" on the front. I know they are slightly larger diameter than the 27.5+" so does anyone know if it will fit without replacing the fork. I think he wants a 2.5" x 29" on the front. Thanks