For sale parts from two different motors, I was trying to make one from two but have given up. Both motors were error free before opening but one had damaged housing and the other bearing noise. I dont have the patience to continue so I bought a brand new motor.
Selling everything as a bundle...
Everything is in place, lubed upp like there is no tomorrow.. turns nicely. Yesterday before opening again I got W013, now I only get E010.
I AM OFFICIALLY GIVING UP :/ Pulled the trigger on a brand new motor, should be here Monday. I need my bike to work flawlessly as it is my commuter to...
But dont you think its strange that before I started trying to kill the duck in the "new motor" with using the two gear packs with the new bearings from the old motor, both motors were completely error free, even my old motor with the big ball bearing completely blown up and the housing around...
Further update: The right side of the housing (where the big bearings go) is completely shattered on my old motor, and that is the reason why I am trying to make one motor out of the two I have.
Just strange that the internals of my old motor (apart from the big bearing) are fine and no error...
Motor turned very smoothly, both with the bearing installed in my old motor and the "new" one.
Even stranger now after moving everything from my old motor into the new motor housing (also moved the inside of the motor) I still get the W013 which I didnt get previously on my old motor and these...
Hi guys,
Intro: 2017 Focus Jam2 with 8500km had bearing problems, replaced them but housing was already damaged because of the big bearings on the outer right side were eating it. No errors.
Bought a second hand motor (mistake) with 3000km. Worked well for about 300km and then developed the...
Mine has now 8.500km+ and the motor has died, well its not dead but making noises and then losing some power.
Probably normal for 5.5 years in all weather (rain, snow or shine) and salty conditions. No offload use though
Focus Jam`2 factory 2017 with Shimano E8000
8500km now in 5.5 years in ALL weathers (all year commter). Doeas not see much offroad but does see salty roads.
Yesterday the motor started making a grinding/clicking noise, then went away. This morning it came back, got louder and then went...
Took it there this morning, Andy Schleck Cycles here in Luxembourg. Spoke to a very friendly technician, but I suspect they will want to change the battery
I have tried to unplug and plug the charger multible times to try to trickle some volts into the battery, no go
I have tried to hold the button while plugging, still nothing
I have left it overnight on charge, but the same thing happens, starts to charge for about 15 seconds, then red light on...
Bike and charger always kept indoors when charging, 22°c Garage temp
I even tried to heat up the battery pack by blowing hot air from a heat gun to the bike frame downtube, with no luck.
2018 JAM2 Factory Plus
4000km
4.0mA charger / 220v mains
Have installed lights which are were on (has been ok to charge with them on as they draw very little current)
got home on red battery indicator, plugged the bike in, left it there. Morning after it’s completely dead. My charger wall...