Search results

So, for anybody interested the 0.86 and 1.02 cubic inch spacers are not recommended for a 55mm stroke shock with "CR too high" appearing in the notes column for these two. I fitted the 0.4 cubic inch spacer which I think I'm happy with, no more harsh bottom out and good support in the mid...

Has anybody here tried changing the volume spacers in a DPX2 fitted to a bosch jam2 6.9? Currently I have the smallest spacer, 0.2 cubic inch and am running the shock at 285psi to get a supportive feel. I'm not super heavy, 90kg with gear, CamelBak etc. And I think 285PSI is way too high a...

ZS56/ZS56

Yeah more because the things I've done to my Jam2 (slacker HA, mullet, more travel, burlier shock) are just making it how a Sam2 comes out factory. Definitely liking the shorter chainstays, it's so easy to pop the front up now and it feels a lot more comfortable in tighter berms

This is my '21 jam2 6.9 I bought in march '22 because it was pretty much all there was available with a Shimano/fox build. The headset lasted all of 200km before seizing and being swapped out for a 1.5 degree angle set from works components and a 170mm air shaft in the fork to bring the front...

I Don't think they would warranty it as that's just how SRAM brake normally feel. It's a feature, a bit like ABS.

Hey guys Im sure this has already been mentioned and I've probably just speed read the thread and missed it - but did you guys flipping the chip have to change the brake caliper mount? I'm going to mullet my jam2 and I want to make sure I've got all the bits first.

Works components do an angle headset that presses in place of the top cup and accepts an standard sized top bearing. I think you can get one in a .5 degree if you don't want to mess with your geometry. This one on my jam2 is 1.5 degree.

I had similar problems, my headset failed after about 300kms. I don't think they are a very good headset. Luckily the ZS56/ZS56 setup lends itself well to an aftermarket angle set - so I slackened the head angle on my jam2 by 1.5 degrees and ditched the stupid cable in stem setup when I replaced...

I meant to leave in the car, so you can swap batteries if you return to the carpark for a lunch/drink break. Or alternatively if you are travelling, camping etc. And don't have access to a charger to charge overnight a spare battery can come in handy. I don't think I ever suggested people would...

What spec bromo are you looking at? The N8 (the first google result) is pretty well specced, the slacker head angle, 38 elite and x2 make it a far better choice for an Enduro bike than the focus. The wheelset and battery arent as good as the focus but there's aftermarket batteries available for...

You could probably find a 12sp deore take-off groupsets cheap enough on marketplace. Tbh I'm not even sure what you are trying to do, run the wheelset off your bazongo on your Jam2? I wouldn't bother, just get some road tyres to fit the jam2, or just wear the magic Mary's on the jam2 out on...

You'll want 15x110 front and 12x148 rear with the appropriate driver on the rear for your cassette. If it's Shimano 12sp it'll be microspline if it's something else it'll be something different.