My Rise H10 has had a click noise come from the rear axle area when applying the rear brake since it was new. I assumed it was the brakes or the wheel spokes bedding in. It has gotten progressively worse, now clicking when applying heavy pedal pressure and when rear braking. I have determined...
My clicking noise is definitely coming from the seat stay/ rear wheel swing arm pivot. Does anyone else out there have noise from the pivot with the rear brake locked and rocking the bike back and fourth???
I have determined that it is not the wheel at all. It is the seat stay to swing arm pivot. With the rear brake locked rocking the bike back and forth will produce a pop/clunk in the pivot/ rear brake area. I noticed some play at the pivot so I decided to pull it apart. Low and behold who ever...
The rear wheel/hub since day 1 has made an annoying click when pedaling under load and when braking. At first I thought it was just the spokes seating in but now I have over 300mi on the bike at the noise is getting worse. Spoke tension is good and the wheel is true. Cannot find anything...
Would it be possible to swap the Occum rocker arms over to the Rise? I have the Fox 36 with 160mm air shaft up front already and think 150mm rear travel would compliment that nicely.
Does anybody know how Orbea is able to get 150mm of rear travel in the Occam LT? Looking at the spec's the rear shock is the same as the Rise, 210 x 55. Do the upper pivot arms have different geometry? I reached out to Orbea awhile back and never received a reply back.
So I have a Rise H10 with 200 miles on the odometer. The last couple of rides it has had a irritating snap crackle pop when pedaling that got progressively worse. It was coming from the rocker arms/ splined shaft interface. I pulled everything apart, cleaned and greased the bearings and...
FYI the Rise Hydro has a different pivot axle. It does not have the expanding wedge set up. It is basically a bolt and nut arrangement, the nut is on left side which allows the pivot axle to be removed on the drive side. No fussing with the cables.