Search results for query: *

Just bought a e13 rear wheel with Sidekick hub. Will have a closer look to the bearings on regular basis...

https://magura.com/product/ett-hose-connectors/

Found this one as well https://zenocycleparts.com/collections/q-connector-bicycle-hydraulic-quick-coupler

Off topic, but as you've been mentioning headset cable routing: Apart from electric shifting and drop posts, to have a quick coupling on the rear brake hose like the one on the ABS would be fantastic!

Full report, impressions, bike weight? 😉

For 2021: 776605-0046T Don't know if the settings have changed 2022.

You may try the rise change, because if it doesn't convince you, you may still be able to fine adjust by moving the stem down. On another side, 800 mm is wide. Did you consider to cut the bar? I'm about 177cm and have my bar cut at 750 or 760mm.

I don't own the '23+ wild but the previous wild FS. Also with 160mm of travel front and back. At the front, I've upgraded the FOX 38 factory with a smashpot v2. As it was diving a bit too much, I increased the travel to 170mm. So not to get more travel, I didn't feel the need to, but to stay a...

My wish is a DJI CVT motor gearbox unit similar to the e-mtb owuru MGU expected 2028...

I've got shim stacks from Fluid Focus for the DHX. Couldn't be happier.

I had a 36 tooth from Wolf tooth. It fits. Swaped for a 34 tooth.

Found a solution: just close the lock switch :ROFLMAO: I tried to close the LSC half way. Was better, I could reopen the rebound a few clicks. Got confirmation from a tuner to move to a stiffer rebound stack, and maybe also a stiffer compression stack.

I tried the 425 and the 400 spring. The 400 gave me the best feeling. But still pogo-ing when I drop into a g-out. I still have the LSR fully closed. Does it lack HSR? The damper came with the light rebound and light compression settings. By the next service I'll revalve it to the medium...

I also have a smashpot, with 45lbs spring, set to 170mm stroke. Tried a 50lbs spring, was to hard. May try a 40lbs spring.

The MRP Hazzard, seems to be a nice shock. On the DHX the LSC is to high and the rebound to fast, so the it doesn't seem to be possible to find a good setting only with the clickers. I think a revalve is mandatory. But first I've to find the right spring. I'll get a 400lbs and a 425lbs to...

@Bruce J, what for a coil spring damper did you take? I tried a FOX DHX which is branded for the Gost Riot EN / E-Riot EN. 450 lbs spring (I'm about 175 lbs with gear). Still struggling a bit. I have to run the rebound fully closed and the compression open. I'll try a lighter spring and...