Search results for query: *

I realise value can be perceived differently so try to keep this just for fun & light-hearted! Just been looking at what I could replace my 2022 Reign E+ with & my research has got me thinking, we all look for the best value, so what's the worst value ebike currently on the market, in your opinion?

Hi all! Does anyone have experience replacing a bushing mounted shock with a bearing mounted one? I've found a Fox Float DPX that should be a decent upgrade from the stock shock on my non-ebike ('21 Norco Fluid FS). The Fox shock uses a bearing mount rather than a bush though. From the limited...

Hi all! I'm unsure which reasonably priced 203mm centrelock rotors to buy. Ideally I'd like them to be 2mm thick & one piece. They must be able to accommodate a speed sensor magnet somehow. Any recommendations? The Magura MDR-C centrelock rotors don't appear to have the hole for a magnet to fit...

Hi all! I have a 2022 Giant Reign E+0 that regularly stops charging around 85-92% ish. I think it's an issue with the charger itself as when I unplug the charger from the bike the green LED remains flashing meaning it's 'charging' whereas it should go back to solid red (not charging). If I power...

Wanted: Seat clamp for X-Fusion Manic (or Manic LC) dropper post. Specifically just the part circled in red. May take an entire post with the clamp even if faulty for the right price? Cheers! Thanks!

The bearings in my Giant DBL rear hub & freehub require replacement. Does anyone know exactly what hub this is? It's a DT Swiss something, 350? Is it just a case of punching them out & press new ones in with a suitably sized socket, or will I need a proper bearing extractor & press kit? Thanks!

The brakes on my Giant Reign E+0 are really noisy, they use metal pads (gold backed) which I know can be noisy on initial bite but jeez these are so loud I can't bear it! I've swapped pads & cleaned rotors several times but they're always the same. Is it just the pads causing this? I have read...

My Giant Syncdrive Pro (Yamaha PW-X3 underneath, I believe) makes an odd noise. It only happens when pedalling at high cadence with little torque input on the pedals, and it's a chirpy squeal noise. I had a PW-X2 in the past that made a similar noise. Anyone else experiencing this same noise...

Just seen a third Across headset premature failure. One came fitted on my Vitus Sentier, it lasted two rides before seizing up and the lower bearing was made of pure rust inside & out. One came on my Scott Genius and whilst it did a little better than above, it started creaking like made within...

Hi all! I'm looking at a couple of bikes with the Yamaha PW-X3. I've experience with the PW-X2 which I liked however when riding along on the flat the power tended to ramp up & down constantly, which my current Bosch Gen 4 does not do. Does anyone have experience with the PW-X3, and could...

Specialized Status 160 size S5(XL). In excellent condition, has never been used for any enduro type action. Spec is as per description on the Specialized website. Only modification is the bars have been trimmed to 780mm. Located near Scunthorpe, North Lincolnshire or Could possibly meet at...

Hi all! I'm currently in the process of building a super cheap gravel bike ready for the summer but need some advice as I've never been into or really even ridden any more road orientated drop-bar bikes. So far I've got nearly everything I need however I'm struggling with which brake/gear...

Hi all, Currently building a DIY gravel/commuter e-bike based around a Pinnacle Pyrolite frame I acquired as a bare frame and forks. The rear dropout is quick release, but I'm not sure if it's supposed to fit a 135 or 142mm axle? It measures 137mm and can be either squeezed to fit 135 or just...

Full spec sheet here Barely used and in pretty much as new condition. £350 ono, located near Scunthorpe, North Lincolnshire. Could possibly meet at Sherwood Pines or Dalby forest. Lovely trail geometry hardtail with Deore 1x10 drivetrain with clutch, two piece crankset, tubeless ready...

Hi all! I am wondering if anyone can shed some light on what to replace my headset with? Currently fitted to my Scott Genius eRide 920 is this (from the website): "Acros Blocklock / Tapered 1.5"-1 1/8", OD 52/62mm, ID 44/56mm" It's started creaking, I'm not sure I like (or need?) the blocklock...

As per title, I am looking for a 27.5 rear wheel. Must be 12x148mm boost hub, preferably 6 bolt & Shimano Microspline. Located North Lincolnshire. Cheers!

Hi all, whilst deliberating ebikes recently I noticed that Scott don't seem to crop up too much compared to many other brands. So, just a general query, why do you think this is? I barely knew they made one until I stumbled across the eRide 920. For the money it's extremely hard to beat, I love...

Hi all, just bought my first eeb! Previously had an analogue hardtail but I'm getting old, my knees are iffy & back isn't perfect so decided it was time. I can't wait to get out for longer, faster & further. So, where should I be going? Sherwood Pines isn't too far from here but guessing I'd be...