Search results for query: rise bearing

Nuckaman, I'm going to assume by your question that you are asking if grease would work equally as well as Loctite 638 on the splined interface where the linkage arm attached to the upper pivot axle? When I originally began servicing the upper axle on my Rise, I tried applying grease on the...

yep good to know, yes I would use a steel hammer on a brass drift. I just replaced the bearings in the freehub on my rise the same way.

I've got the same on my bikes. The newer rear mudhugger has an extra flap that extends forwards which is especially good on the Rise, protecting the charging port as well as bearings. (mudrocker looks effective too)

@Rod B. Do you think it's worth doing on a new frame before it gets ridden or just wait until it needs done? Frame sat in garage awaiting final parts, or am I just wasting my time?

Bump. Seems to be a dearth of info on how to do Rise bearing replacements and the appropriate tools. Mine (and K's) definitely need doing (but they've done two summers and a winter)

Linkage Axle Bearing

Bike / Product Year: 2024 Manufacturer: Mondraker Model: Dune RR Size Medium Asking Price: £8400 Location Wexford Description Very exciting bike just landed in the shop. The build comes with a 170mm Öhlins RXF 38 M.2 29 fork, Öhlins TTX Air 205X65mm shock, SRAM transmission with GX...

Thank you Rod. I have seen the articles; they are fantastic and much appreciated. I was going to use the first to try and do what you described here, so it was fortunate timing for me to see this. I do most of my own work but I'm definitely not advanced. Though I do already have that torque...

excellent to hear, can you confirm it still sits 5mm or so from being flush. it still doesnt look right that a hollow aluminium bolt seems to be the only thing keeping the seatstay non drive side attached to the rest of the bike. Are there any other Orbea rise owners that have noticed the non...

Bike / Product Year: 2023 Manufacturer: Rocky Mountain Model: Altitude A50 Size Medium Asking Price: 3150 Location Blackpool Description Absolutely Mint 25 road miles ridden only Cost 5700 18 months ago Upgraded Burgtech pedals Invisi wrap Planet 3 tune Tubeless tyres Remaining warranty...

Thanks Rod, will look at this when I get chance. Plenty of time though, as I don’t have a charger for the bike at the moment. Been 3 weeks without one and just been told that it’s not been shipped by Orbea yet!!

Well, that sucks…. I’ve seen several Rise chain stays where the milling on the bearing bore has been for shit. This is the first time I’ve heard of the notch missing. It seems like you have several options. The Rise has a two year warranty. It’s clearly a defect not having the notch. You can...

Cookie, The Rise Blue Paper for both models (Years 21/2022 & 2023) show that the upper axle pivot bearings have stayed the same (Enduro 6804). Therefore it may be possible to do the conversion. To have a better idea, we need to know if the design of the chain stay arm where it mounts to the...

Hi Guys, I´m new here in the forum. I read a lot about the bearing change procedures. Thanks a lot @Rod B. On my Rise H15 2022 which I ride since December 2022 I did a deep inspection of the bearings during the fork and the shock were disassembled for servicing. I found out, that both...

Gen2 had the tiny chainring which span at a different speed to the cranks. Incredibly solidly built motor but really needed bearing man's extra seals to stop moisture ingress. Gen4 was the normal sized chainring. (gen3 was a commuter type motor). Worth doing the grease change behind the...

It’s not what you asked but Chris at Mojo Rising / Geometron bikes fixed me up with a v3 Storia for my KSL. (Custom shorter piggyback, spherical bearing one end. Those help lots with side loads) It’s fab. Better pedalling. Better grip. Smoother ride on the chunder. Go for it. If you’re in the...

"I'm starting to regret getting my Orbea Rise" ... yeah, me too bought in May 2023 - a week after the purchase I noticed a crack in the lower engine mount - so I complained. No response from the dealer until July, then it was confirmed that a new frame was coming. I have to pay the costs for...

As it has the clamp bolt assume that's why he said you grease it up. I did the same. I emailed them initially and asked about using loctite, they said no need with the clamp. As it uses the clamp at 5nm it wont matter as no need to preload it as per OEM. Agreed, the instructions were lacking...

The lower pivot axle will bite you on the ass every time........That's awesome you tracked the noise down. Been there and done that. If you haven't seen it, here's my tech article on servicing the lower pivot axle...

I wonder if you could use a "reverse components" .5⁰ headset race in conjunction with the wolftooth? I think they work with most headset. It didnt work with my "works components" 1⁰ angleset but i think the angleset has a little something different going on with the bearing shape. That would...