Search results for query: cable routing

...reading this later. So to update the community knowledge properly: the Kross Hexagon 4.0 is incompatible with the TSDZ8 not because of cable routing complexity, but because of a welded structural element at the BB area that physically blocks the motor housing. No amount of cable creativity...

As per title, I'm making a list of ICR handlebars and stems. If you know of any more please add them below. AliExpress stuff is fine but I'm purposely not including integrated bar/stem combos. Thanks! *assume all are 35mm diameter unless stated Bars: BBB SkyBar (alloy) 30mm rise...

I'd be interested to hear what you think of the Lewis brakes - the AE look like bargains

So Rise owner with Internal H/S routing here. I didn't like the idea. I swapped the brakes on both our Rises (and one of the droppers) when they arrived. Holding all the parts of the headset together was a fiddle. I've just done a complete rebuild of my bike to replace the front triangle...

This quite helpful, I think the route to get the spec I want is start with the m-team, remove electronic dropper and splitter, fit dropper of my choice, connect rear mech cable to motor, remove rs controller and splitter, fit a good upper headset cup and bars/stem of my choice, get an avinox...

I use a X-fusion dropper which uses a cable and fully extend the post , loosen post bolt , turn bars to the right to free up cable (if lever is on the left) , in the same movement pull post up while pushing cable towards the frame route hole until it’s free , unhook cable at bottom of the post ...

Yes, that's correct. The SC-EM800 display and the SW-EM800-L remote are sold separately and you'll need both. The display handles the screen and data, the remote handles assist level switching from the bars. They're designed to work as a pair, and community experience confirms the EP8 motor...

...Teewing its out because no mullet option. Vala is out, not enough travel for this dirt couch loving slut. Bosch wild is out. Head set cable routing can fuck right off!!!! So if i had to choose my least hated favorite bike out of this lot i'd choose the vala based solely on being mullet...

I hear ya. I purchased two things that I swore I'd never buy to mostly overcome the headset cable routing, at least not until they were both hardwired in to the main battery, electronic shifting and an electronic dropper. As a result, I'll only have the rear brake cable entering the headset...

I just got the H10 LT and it's an amazing bike. I certainly wouldn't let the headset cable routing put you off it. I'd also echo what the others have said about hardtail emtbs being not worth it.

I've got one of these: ACROS AZF-675, ICR (Integrated Cable Routing), Top Zero-Stack 1 1/2" (ZS 56mm), Bottom Zero-Stack 1 1/2" (ZS 56mm), Fiber Inserts for Angle Adjustment On one of these https://www.cube.eu/uk-en/cube-stereo-hybrid-one55-c-68x-tm-750-29-olive-n-chrome/736510 And it's...

I don’t think that will work. The shift cable is routed through the lever from the “back,” and there’s a stopper at the end of the cable

I’m peaceful with the small holes (Axs cable and speed sensor). I meant the bigger open areas where u can see motor case and the main cables directly. My Amflow keep the motor all covered in the frame as comparison.

One question to levo sl owners: Is the rear shift cable housing routing tube-in-tube or do I need to drop the motor/battery when routing the shift housing?

Spotted this on Instagram, it's exactly what internal routing should be like, not how it is with the cables going through the bearings. https://easybikeparts.co.uk/products/easybikeparts-zs56-icr-upper-headset-assembly-for-integrated-cable-routing

I have a barrel handlebar pack but it interferes with the cable routing and not easily removeable/replaceable so im looking a triangle frame bag for a medium urrun. brand/model if you have it. Thanks.

Does this cable not replace the battery and power the AXS derailleur from the DJI battery and the motor uses the power pulse as a signal for the smooth shift?

Short answer: not directly, no - but it's worth understanding what this thread is actually about. The cable discussed here is the Smoothshift cable - the wired connection between the Avinox motor system and an AXS derailleur that allows the motor to cut torque momentarily during shifts. It's a...

For future use, maybe? Get rid of the internal silly stem and put in this to get rid of the cables going through the bearings?? https://easybikeparts.co.uk/products/easybikeparts-zs56-icr-upper-headset-assembly-for-integrated-cable-routing

When I bought the NX Shifter I opened the rubber cover and took the cable off and then fed the one off the SX Shifter was used and fitted perfectly.