Search results for query: Installing Magura brakes

A pic after a 1200m climb, with a big part on asphalt, that used 56% of the batt using the "Tour" mode for my 92Kg. I did not like too much the SQlab saddle in 14cm. I ordered a 601x in 15cm, and it's very good ! I have tested LOTS of saddles other the years, and this one gives a great support...

Alright so jumped 2 feet into the deep end upgrading my rail. Had it for 4 months, put 1300km on it so it's not a garage queen :) First off got rid of the Bonty standard comp line rims - one of the rim strips was clicking and pretty sure play/flex was creeping into the rear hub - cranking on...

In case anyone wants to install Magura MT5 / MT7 brakes on a Commencal meta power sx 2021, the 220mm rotor does not fit at the back, but a 200mm will fit.

I believe you’re talking about the angle or pitch of the brake levers. I’m not aware of a tool but an app for your phone called “Pitch Guage” is what I use. In fact I just adjusted and matched my neighbor’s brake levers. You could record the angle or reference the position on the Bar. btw, I’m...

Is there a match maker lever adapter I'll need when installing MT5 brakes? Or will the on that came with my SL Comp work with the Magura levers? I can't find one online to order either... I've been looking around on the forums and cannot find a definitive answer. These are the new 2021 MT5...

I decided to install Shimano 203mm rotors on my Tubo Sl that has code r brakes. I just could not get the centerline rotors to perform quietly. I used a 1.5mm shim to account for the 200 to 203mm rotor diameter difference. I had an RT66 that was made in Japan that I used for the front and have...

Did you need spacers between the caliper and adapter ?

My rear wheel brake pads in the 2 pistons Magura caliper last only about 1-2 months. I live is hilly landscape and do wheelies all the time and use the brakes a lot. I'm wondering if I install 4 pistons and bigger 210 mm disk brake on the rear wheel the 4 pistons caliper pads will lasts at least...

I have the SRAM AXS drivetrain on my Spesh Levo S-Works and Vado SL hybrid and had it on my last 2 previous mountain bikes. Running XT on my YT Decoy Elite and actually think the Shimano shifts smoother. The XT chain, rear cassette and chainring are actually less expensive then the SRAM AXS...

Howdy! First time poster here, hopefully this thread is still active. I’ve recently installed magura mt7 brakes front and rear on my 2021 levo sl. I have purchased one magura 220mm mdr-p rotor and the qm-45 adapter to provide the needed clearance for the Fox 34 rhythm fork. The instructions...

I think what you’re asking for is the Magura Shiftmix for SRAM. Personally, I use the “left” Shiftmix on the right lever and typically get a set to also mount my OneUp dropper remote lever.

Running full Magura MT7 set-up on my Spesh Levo S-Works haven't had any issues. Have a few rides on my Shigura set-up on my YT Decoy Elite and braking power is incredible! Almost too good?, don't know if I would use Shigura's on an acoustic bike. If I were to critique the Magura's, would say the...

https://www.bike-components.de/en/Magura/QM-45-Disc-Brake-Adapter-for-220-mm-Rotors-p73454/ I installed this. It seems to work, but as the guide rs brakes are designed to work on 180mm the brake pads overhang the rotor a bit. Similar thread...

Think I'm finally done upgrading.....unless I upgrade to a Volt/Raw 9.7 frame, & swap all the parts over. Components are dialed (just need to install 220mm rotor up front). Upgrades: 2021 Fox Factory 38 Grip2 170mm 2021 Fox Factory DHX2 230x65 Santa Cruz Reserve 30 I9 Wheels Magura MT7 Brakes...

Cheers ? I was going to use the Magura barbs, is it worth using the thicker Shimano ones instead? Cheers ref calipers - are the estop mt5s the same as the normal m5's?

After riding for about a month now, been able to ride a wide array of trails. VERY impressed with my custom Decoy Elite! The Michelin E-Wild's are a perfect match for this Enduro/DH slayer! Not the best for climbing, but this bike was designed for descending! The mullet setup really does offer...

Does anybody has an technical explanation why Magura strongly warns against using Centrerlock for MDR-P. Recently i purcased MDP-R 220 mm rotor and mount it to "Reverse Component" centerlock adapter and it fits well. Didn't find any reason not to use it. I see that some users had to adjust...

I have one of those and offered it up today and it doesn't look like its going to provide enough spacing.

You're not going to regret the setup bud, I love mine. One thing I learnt first of all is you need the thicker brass barbs from Shimano as the magura hose is a little thicker and they can somethimes be a bit of a pain to seat. However, for the last two shigura sets I've installed I've opted...

Just finished a ton of work. Built up new wheels front and rear (Light Bicycle rims, DT comp/comp-race spokes, SRAM X0 front hub, Onyx Classic rear hub, Tyrewiz TPMS. Yanked out the Shimano brakes and installed TRP DHR Evos on Magura MDR-P rotors. Front rotor is now 220mm. One thing that I...