Search results for query: rise bearing

And cable routing? Still trough bearing or can you choose?

MMc2K25, I'm happy the tech articles helped you out. Make sure you use an excellent quality marine rated grease on the inner bearings races upon which both the lower and upper axles ride upon. I mention marine grease because they tend to be waterproof and less prone to wash out. You want the...

Pretty certain that both Bosch & Shimano hide that last 5% from you, only showing you your useable range, where-as other brands include the unusable part of the battery that you cannot use as part of your '%'. So a Bosch 600wh powertube has an effective 600wh, where-as the TQ60 has an effective...

New zeb but pictured with old one :unsure:

E-bike Battery 840Wh battery UI/Remote Mastermind TCU, 2.2" high resolution screen, fully customizeable with Specialized app, works with Apple Find My Motor Specialized 3.1 Motor, 105Nm torque, 810W power Charger Specialized 4amp charger Frameset Seat Binder Alloy, 38.6mm Frame Levo Evo FACT 11m...

Hi! New to emtb - I'm going to buy my first bike and have been eying Orbea Rise. Are Orbea a solid, durable brand? Looking for an agile, fun and light bike - I'm 177cm and 78kg, live in Europe. What do you recommend? Thinking one of these I found on sale: FRAME Orbea Rise Hydro 140mm travel...

@Singletrackmind, plenty to unpack here. The Zendit's ZERO suspension is genuinely well thought out. The ZERO platform is a dual-link layout targeting pedalling efficiency and reduced pedal kickback, delivering 165mm of rear wheel travel through a 205x65mm trunnion shock. The key kinematic...

Has anyone attempted this yet? I'm trying to work out exactly what the procedure it. I think - bearings installed in threaded part - that installed into yoke with special tool. - axle/bolt done up to 12 nm However - how are you supposed to use a torque wrench on that bolt? mine's small and...

As I've described before. I build my own wheelsets because I'm so fussy about amount of noise the freehub makes, and the access to inexpensive bearings, pawls and springs. So I'd prefer they didn't add cost to the bike, when I'm just going to change those components. The Koozer 490 Pro rear hub...

Congrats. I don't know about Mezzer, but downtube will hit to Fox 38 on size M. My advise is to keep stock headset. It is fine quality from Enduro Bearings. The knockblocs will eventually brake, then you have no steering stop anymore. Those are designed to fail, so everything else keeps intact...

On a decent ride with over 2000ft of climbing I managed 28 miles on the internal battery. Bear in mind I have a problem with my legs so tend to rely on the assistance for climbs a little more. On a less hilly ride I would think you can obtain 30 miles... I don't particularly feel the limiter...

Is there a trick to getting the collet wedge out? I tried a pick, but mine seems stuck.

Did you do this primarily to keep the rear brake hose outside of the bearings, instead of inside? Or maybe because you dislike the stock knock block? Your fork does not contact the downtube, but I guess this is a problem on certain combos. I'm going to disassemble my entire Wild and I will...

I contacted Jenson USA where I bought my rise online. They contacted Orbea and Orbea sent them the evo 2 piece updated link which I received today. I will install it at some point. My drive side link was not missing the washer, the bearing inside linkage arm was being pushed to the outside of...

It's definitely the main linkage pivot that gets the creak. My bike made a really loud noise coming off a drop at the weekend and I feared I'd broken the main pivot axle (did that on the original Rise) but took it out (it's a new design that looks like it might be beefed up vs the design on the...

yeah that is what I thought. Drive side always looked too tight to me. Started getting creak noise from shock so I re did the preload and back the bolt off a little and saw there was no washer against bearing. I will contact Orbea and ask them to send me one. thanks!

Been helping a mate to change the lower swinging arm bearings on his orbea rise. Quite an easy job and working in the sunshine made it a pleasant job.

Right, I have what I need. The MXC 6 has a 630Wh SRAM Eagle Powertrain battery (which is the open-down-tube design - not the 720Wh slide-in version). Now to write a proper stockpiling guide for Brian. @dezzracer - Brian, sensible question, and exactly the right time to think about it (when...

The 8Nm spec for the top cap is for the M model bikes (carbon frame, and different headset). However, now that I've had more time with this, experimented, and replaced my lower bearing, I agree with the comment from @Silent_Jay that even 6Nm is too much (and I have an M bike where the spec is 8Nm).

Thx Rod, it's the chainstays that hold the bearings. I went ahead and ordered a full bearing kit and the Rise specific tools thru ProBearing tools, it looks like I can use them on other applications and have been meaning to buy a good bearing tool set anyways. The bike is 4 years old and has a...