Search results for query: *

  1. emtbeast

    2027 Orbea Wild LT Released - Avinox Powered

    Interesting development in the e-mtb world. Bosch dropping out of Eurobike, wonder what's cooking there. I still think we the emtb crowd are just a few buckets of water in the whole ebike pool where Bosch has a huge share. I am sure Bosch has the know how and the resources to create a...
  2. emtbeast

    2027 Orbea Wild LT Released - Avinox Powered

    I don't know, but seeing the slow motion shots of mtb/e-mtbs being ridden hard you can clearly see how the rear triangle gets twisted sideways etc...and with a bit of logic anyone can conclude that a gap like this on this point of the frameset can be a weak point. I don't know, maybe it has a...
  3. emtbeast

    2027 Orbea Wild LT Released - Avinox Powered

    A question for those owning the Bosch gen5 version of the Wild. How is this part of the frame holding up? It's held together with a bolt, just like the left Shimano crank. On the Bosch Wild It's on the bottom of the linkage, but on the Avinox Wild they changed it to the top. Gaps like that on...
  4. emtbeast

    2027 Orbea Wild LT Released - Avinox Powered

    Well yes it's physics and math, can't cheat your way out of that. Now if they managed to create a motor feel with their tune that hides the drop-off to a degree for the rider, that I don't know. I guess the reviewers and happy new users can report. ✌️
  5. emtbeast

    2027 Orbea Wild LT Released - Avinox Powered

    A technical bit about the RS Tune 750W peak and 130Nm, how does that work out. I think someone asked about this. There is a simple formula that we can use... Power (W) = Torque (Nm) × RPM / 9,549 What is 9,549? The number 9.549 is a mathematical constant (conversion factor) that connects...
  6. emtbeast

    Orbea x Avinox Rumours

    Found this on Fb...
  7. emtbeast

    Orbea x Avinox Rumours

    ☝️This☝️
  8. emtbeast

    Mondraker Zendit Avinox

    Hey thanks for a detailed anwser. I am looking for my next ebb and Zendit is a contender. I am 5'10" (178,5cm)so a bit shorter than you and I got from my calculations for the 200mm AXS on the zendit that cca 1.5cm is limiting me for it. Could I ask if you can measure the distance from the...
  9. emtbeast

    Mondraker Zendit Avinox

    Sick bike🔥 wish you a lot of happy miles on it. Dont know If I was following good enough, this is a 175mm or a 200mm AXS Reverb V2 on the pictures?
  10. emtbeast

    Avinox M2s rattle

    When I saw the plastic(probably delrin material)mesh gear for the 1st time, my initial thought was 》Wow great idea, but why so thin? It looks like maybe only 3-4mm thick. How is the durability going to be, Is is going to last or will it need replacements after a while. Then I thought, well...
  11. emtbeast

    Project to enable Bosch + Garmin integration

    Forgot to mention in my previous post, but as @slavio already found out, the Bosch Garmin integration only works with beta firmware installed on your Garmin device.
  12. emtbeast

    Project to enable Bosch + Garmin integration

    These are the Garmin bike computers currently supported: More information here:
  13. emtbeast

    Project to enable Bosch + Garmin integration

    The new Garmin Bosch integration is welcome, but is a bit meh imo. It's still not an open ANT+ LEV protocol broadcasting the data. It's only Garmin-Bosch exclusively. You need to pair the Flow app with your device. It is only open currently for some Garmin bike computers and not for Garmin...
  14. emtbeast

    Avinox launch 1500w M2S motor and cheaper M2 motor

    The UCI approved M2S Version
  15. emtbeast

    New Amflow PX April 9 specs

    You can most probably remove cca 700g by replacing the DH tires and tubes with trail oriented tires setup tubeless.
  16. emtbeast

    New Amflow PX April 9 specs

    Looking at the RS800 battery dimensions 72x69mm(WxH), adding cca 1 cm extra for the frame thickness and some tolerance and some guess it's safe to say the downtube is cca 82mm in width and 79mm in height. It's probably a bit more in height to accommodate the locking mechanism and battery cover.
  17. emtbeast

    Avinox launch 1500w M2S motor and cheaper M2 motor

    Dang yes I think you are correct, my math teacher was never to pleased 😉🤟. Will fix my post accordingly. So the potential of the cell format is even higher ✌️
  18. emtbeast

    Avinox launch 1500w M2S motor and cheaper M2 motor

    Excellent detective work 🤟. Interesting, actually a real custom(all-tab/tabless) cell, so slightly (4mm) thicker and (2mm)shorter than we thought. They really went the extra length to do this. Screenshot of the cell info: What is interesting is who is Ampace or better said who is their dady...
  19. emtbeast

    Bosch Gen 5 Rumour - More Power updates coming!

    So far Amflow/Avinox is the only one I know of that did a custom cell for an ebike. It's fair to say they used an existing design 46.. type cell and shortened it to fit ten of them into their new battery pack. But like @ntm95 said it's kinda off a dead end cell. It only enables a build of a...
  20. emtbeast

    Bosch Gen 5 Rumour - More Power updates coming!

    Yeah the blame is on them, not your self. They should edit their articles correctly. Thanks for your help to the emtb community 🤟
Back
Top