Mteam's latest activity

Mine is the same when you first power on the bike, it takes a few pedal revolutions for the motor to provide assist, but as long as the...

Unscrew the display, and lift it out of the frame, underneath you'll find two cables coming from the display, one goes to the remote...

Thanks for that. Could you try and describe how the firmware has Changed the motor performance?

Shouldn't be the rearhub, because the pedals should just rotate backwards without turning the chain ring at all, so the hub shouldn't...

First motor failed at ~450 miles Frame cracked at ~450 miles - discovered while cleaning the bike to take it in for the new motor...

My first hpr50 motor failed at around 450 miles and was replaced under warranty, the second motor is now on 1000 miles and is still fine

It'll be due to the supersoft compound tyres on the bike that's slower rolling. Assuming there's no brake drag, or issue with the...

this place is ok (if a bit rundown), and quite good VFM if theres a few of you. Quite a few of the pro mtb teams stay there - saw some...

if you have the very latest firmware installed on the motor etc, then you can use the tq app to see the versions, but if you have any...

I received an answer yesterday (after a short reminder). TQ confirmed that you need to install the component updates to make the new...

The e13 alloy cranks that came on my 9.5 are not self extracting, so I needed a crank extractor tool

I'd doubt it - Sounds like the motor is broken to me, but I guess you'll find out for sure soon enough

No, it's a separate setting, nothing to do with the other screens. I think it's worth leaving extended center button functionality...

You have inadvertently enabled extended centre button functionality, in the TQ app you can toggle this behaviour on or off.

The clutch in my motor failed after about 400 miles/3 months, with mine the pedals became totally disconnected from the chain ring, they...