Recent content by kirill196

  1. kirill196

    Error after replacing motor on Giant Reign E+ 3 (2023)

    I bought a brand new motor (not used or refurbished). Am I correct in understanding that a new motor does NOT need to be flashed, paired, or activated with dealer equipment before installing it on the bike? I’m trying to figure out what’s wrong because the motor simply doesn’t work at all...
  2. kirill196

    New Yamaha PW-X3 motor

    Hi, were you able to solve this problem in the end? I have a very similar issue with my Giant Reign E+ 3 (2023, SyncDrive Pro2 / Yamaha PW-X3 motor). My original motor burned out, and after installing a new motor I still get the same motor error. But if I install a motor from another identical...
  3. kirill196

    Manual PW X3?

    Hi, maybe someone can help me please. I have a Giant Reign E+ 3, model year 2023, with the Giant SyncDrive Pro2 / Yamaha PW-X3 motor (85Nm, 800Wh battery). My original motor burned out after connecting a computer to the bike. I bought a new motor on eBay (it was not used before) and installed...
  4. kirill196

    Error after replacing motor on Giant Reign E+ 3 (2023)

    I bought a new motor on eBay (the link is attached in my first message). When I install this new motor, the bike immediately shows a motor error — the screenshot is also attached in the first post. The motor does not work at all and the error appears right away. My friend has the exact same...
  5. kirill196

    Error after replacing motor on Giant Reign E+ 3 (2023)

    Thank you for your reply. Unfortunately, there are no Giant dealers in my country. I honestly don’t know what to do anymore — I’ve been dealing with this motor error for almost a year now. I really hoped that replacing the motor would solve the problem, but the error is still there. Am I...
  6. kirill196

    Error after replacing motor on Giant Reign E+ 3 (2023)

    Hi everyone, I have a Giant Reign E+ 3 (2023 model, 800Wh battery). After connecting a computer, the motor unfortunately burned out. I ordered and installed a new motor, but the issue is that the system still shows an error after installation...
  7. kirill196

    Burnt Motor Board on Giant Reign E+ 3 (2023, 800Wh)

    Thanks for the clarification. I’ve checked the connectors on my motor and compared them with the ones in the listing — they look identical. Also, the motor code X2Y appears to match the code on my current motor, so it seems to be the same series. I understand your point about Shimano vs...
  8. kirill196

    Burnt Motor Board on Giant Reign E+ 3 (2023, 800Wh)

    Could you please tell me how and where I can buy this motor? I haven’t been able to find it anywhere. And how can I make sure that this motor is fully compatible with my bike?
  9. kirill196

    Everything about the 2022/2023 Giant Reign E+

    Всем привет! У меня Giant Reign E+ 3 (2023) , и я хотел бы уточнить точное название электродвигателя, установленного на этом велосипеде, а также узнать, где можно купить новый двигатель и на какие важные детали следует обратить внимание при покупке. Существуют ли какие-либо проблемы...
  10. kirill196

    Burnt Motor Board on Giant Reign E+ 3 (2023, 800Wh)

    I’m considering installing this motor — https://www.ebay.de/itm/136442494942 — but I’d like to know if it’s compatible with my bike (I have a Giant Reign E+ 3 2023), and whether it’s enough to simply replace the old motor or if any reprogramming or additional adjustments will be required.
  11. kirill196

    Burnt Motor Board on Giant Reign E+ 3 (2023, 800Wh)

    Hi everyone, I really need your help. I bought a Giant Reign E+ 3 (2023, 800 Wh) and have only ridden about 130 km. When I connected the bike computer, a short circuit occurred, which caused the motor control board to burn out. I took it to a friend who’s experienced with electronics — he...
Back
Top