Recent content by Erjabato

So far so good with seals, yes.

Hello Risers: Last Sat I finally found some time for my second maintenance on the linkage to inspect, regrease and tighten it. First, let me show what small pebbles did in 3000km: As you can see, paint in the frame is sanded, the bearing seal was ruined, and the bearing was totally dry. I...

Hello again colleagues, Thanks for taking the time to write such quality answers Rod! Regarging enduro bearings, I am not able to find the 6804 LLU MAX BO SL (solid lube) in my country yet. On the seal ring kit, I decided to order the 2023 carbon kit. I will report back if it fits 2022 hydro...

Great post @Rod B. !!! Thanks for takeing the time to produce such a complete and helpful guide. I inspected my upper linkage after 1 year riding and some creaking sounds last days, and this was really useful. I cleaned and re-greased it following blueprint + this guide. My enduro 6804 bearings...

H15 comes with Fox 36 performance and 150mm..

I updated my H15 today. All went as described: after successful update with e-Tube app I got a E010 in the display that was gone after power off and on.

It works easier if you use a cable tie to tie right crank to chainring and pedal backwards for some time. I always take some plastic cable ties with me (low weight and can help to fix few things in my routes).

Check this in case it is helpful: Rise Club Tips

Sorry to hear. They will fix it. Orbea is aware of the issue. Problem is the time you are left without riding.

Any chance to apply blue loctite to the axle thread if you have Shimano cone and cup bearings (MT-510B hub)? Maybe that could help. If you have MT410 hub, that one uses sealed bearings if I am not wrong, so different animal. I just got my MT501, so will give it some time and see. But yes...

Check this: Rise Club Tips Simple and cheap.

That is right, there's a shortage in components in general these days. When it comes to the "Chosen" I was told the weak part is the aluminum based freewheel, so they will probably keep rear hub shell and ship a new reinforced micro spline compatible core/freewheel piece in short to solve the...

Well, I finally got a solution through LBS from Orbea: new wheel with AR30 and Shimano rear hub. Warranty went terribly slow in my view, but worked at the end. BR

I left charger plugged a few hours today in my Rise H and it behaves as @nrgbod mentions. There is a point where blue light gets fixed 2 or 3h after battery is charged. I am wondering now if it is better to charge 85 or 90% to maximize battery life or if it is better to leave charger doing its...

I have seen the same behaviour: battery charged 100% when you connect Garmin, but charger still flashing. Reconnecting charger and then blue light is steady. I think I never left charger for hours after that to discover if blue light comes steady without help :)