Emailsucks98's latest activity

Installed a 27.5 wheel and a 2.6 Minion DHR2. Put flipchip into high mode. Reach shortened a bit by doing so, rolled the bars forward a...

v2, cheers

Not a problem. I'm running a 210mm One-Up dropper (fully inserted into a size L frame) with a 65mm stroke shock and have gotten full...

@Integrainz, that's a good list. I would do the tires & fork airshaft first. Of course if you eventually go mullet, you'll need another...

I switched to e*thirteen Helix Race E*spec 160mm. One benefit of getting new crank arms was that they have self extracting bolts. Went...

Whelp, nevermind, I did another search and found the answer. I thought I broke something but turns out that is how it works.

It's definitely the motor, resistance is there with the chain removed. Pedals forward great. @njatherton, I'll check the crankarms...

Shouldn't be the rearhub, because the pedals should just rotate backwards without turning the chain ring at all, so the hub shouldn't...

I’ve gotten my EXe back with the motor replaced. New motor has quite a bit of resistance when back-pedaling, anyone else experienced...

Good call on that Reeb! I picked up a Steezl and have been loving it.

The clutch in my motor failed after about 400 miles/3 months, with mine the pedals became totally disconnected from the chain ring, they...

Can't check at the moment, but my sense is.... not a lot. I've had the bike since Oct '22 and it's been ridden 2-3x week for most of...

Sunday I was 1k' into a steep climb when my motor failed. Even in walk-mode, it sounded kind of like an impact driver and was providing...

I removed the display from my top tube & stuffed some upholstery foam blocks from my local hardware store into the void. This pressed...

Same here, also electrical tape over the seams between display & top tube (invisible on a black bike) PNW Wet riding and weekly...