Recent content by Driller_AU

Arrr spring in Switzerland. etoni making everyone jealous again

Big thread in the Trek sub forum on this (1) Rail 9.7 shutting off...finally fixed?? - EMTB Forums

Usually not that bad except in spring when they first come out they can be feisty

Yea wear is fine, no ridges or anything yet , wear the metallic/original pads out first the galfer pads are just not as noisy

I have really come across many of Australian bad boys just a few snakes but wifey got this one

On my 2021 rail 9 with code R the rotors indeed have 220/200mm stamped on them , never really checked before just assumed they where 200/180 as per the spec sheet. On my bike I just changed the pads and fluid 1400Ks pads still had a bit left on them but changed to Galfer e-bike pads, best thing...

You guys reckon Australia is bad for wildlife i would prefer any snake or spider to a bear or mountain lion

Never done this job but in my mechanic days with such a job i used to tie a piece of string to the old plug/wire pull it out, tie the string to the new plug and pull it back though carefully, hope this helps

1400 Ks on the rail and time for some upgrades , two Maxxis DHF minions down from 2.6 to 2.5 ,some rev grips , and a Sram AXS setup with new chain . Wasn't sure about the gold chain (only one the LBS had to do the job) but it looks alright to me

Could you guys ask your LBS for the proper name and part number for this, it isn't on the parts diagram T.I.A

Nice job, are the tyres the standard width getting a set for my nine soon

My setup

Wifey and girlfriends came across this old bad boy while riding the local single trails while i was a work (bitches)

Dust proof/water proof box for the back of the van for tripping around Oz

My wife's giant seems to be very susceptible to water around the handlebar controller and after searching on here i got a bottle of ACF 50 off ebay , do you guys spray/wipe it over the controller ? I plan on taking the motor cover off and disconnecting the wires and spraying some in each...