bram.biesiekierski's latest activity
-
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..Every shock ive ever seen has the same size eyes. 1/2" x 1/2". I thought that was pretty much universal across the industry. What...
-
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..I Noticed a small amount of clunking in the forward shock mount. I suspected maybe a loose bolt from my DIY bolt hardware. But i found...
-
-
Bbram.biesiekierski replied to the thread Dengfu E82 | 3x3 nine IGH.THat sounds like alot of hassles. Why dont you build your own rear hub/wheel? Its actually not difficult at all. It is a little time...
-
Bbram.biesiekierski replied to the thread Chainring Guard for AmFlow PX, ideas?.I designed my own chain guard / chain guide for my X1 motor as there was nothing perfectly suited off the shelf. I designed it in...
-
-
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..I took the bike on a long ride yesterday. Rode until 60v (3v per cell), which is where the cut off is currently set. Got about 35kms...
-
-
Bbram.biesiekierski reacted to patdam's post in the thread Dengfu E10 - The CHEEB V1.0 - Discussion with
Like.
still alive In waited of CEF69 frame, i had awake my old E10. A new motor (M510RS), a new battery and i find with lot of pleasure this... -
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..I got the v2 104 to 130 bcd adapters today. I have installed them with a 42t bafang ultra chain ring. Initial impressiona are its an...
-
-
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..It certainly is great fun. A little bit of pure terror and plenty of adrenalin. Ive been playing around with the motor control options...
-
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..Bikes running good. Really getting the feel for this thing now. Its insanely fast, and really gets the adrenilin pumping. Great fun...
-
-
Bbram.biesiekierski reacted to Fast and Furious's post in the thread Conversion - Installing M500/M600 Motors in M620 Frame with
Crap Post.
Hey, are you still creating the adapters? I'm interested. -
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..Its not about top speed. Its about gear ratio / pedal cadence. Remember, the CYC 5spd cassette smallest cog is 15t. A typical 1x MTB...
-
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..I got a PLA print from a friend to check fitment. You can see the gold part below which is the V1 adapter. A fair bit more internal...
-
-
Bbram.biesiekierski replied to the thread The Golden Goose. 72v Dengfu E55 CYC X1 Pro..I have designed the V2 104 to 130 BCD adapter. This one incorporates a chain guide and spacers. Saving on assembly complexity. It has...
-
-
Blol nah brada I’ll just blast by with my aerodynamic twigs. The point is, there’s already 600000 threads on here about restricting...
-
BThis may be controversial, but how about people on this forum quit telling others what they want/need? Just because you don’t want to go...
