Recent content by Ameiza

  1. A

    Hope vs E thirteen Helix Race crankset for bosch gen 4

    That’s a valid point! I’d rather have the crank broken than the motor spline 😅
  2. A

    Hope vs E thirteen Helix Race crankset for bosch gen 4

    I had a bad pedal strike and broke a crank arm on my '23 Orbea Wild the other day. The pedal got loose and the threads were all gone. New cranks needed. I have narrowed it down to 155mm Hope or E thirteen Helix race (due to availability). They retail almost the same. The Helix Race weighs 412gr...
  3. A

    Mondraker Crafty Carbon R, Orbea Wild, Canyon Spectral CF8

    Well, since the Orbea Wild has won pretty much all tests in 2023 and even in 2024, you cannot go wrong. Still, it depends on your terrain and riding style.
  4. A

    Orbea Rise rear shock options

    The rubbing is only visible under full load. I used two ratchet straps to compress the spring during testing. The white paper piece was stuck. It may differ depending on the spring rate, since the springs are getting thicker when higher rating. I would recommend to be careful 😊
  5. A

    Orbea Rise rear shock options

    I tested the same setup on my MY2021 Medium M10, and the coil spring was rubbing against the frame. Isn’t yours a Medium?
  6. A

    2023 Orbea Wild

    I can’t find any discussion about sizing of the Wild. I am 173cm/5 feet 8 inches, which puts me comfortably in the middle of Medium. I parking lot tested a medium H30 the other day, and it felt a bit short. I have a Medium Rise which I really like (160/160 29 f/r with a 50mm stem). The Rise is...
  7. A

    Orbea Rise Cascade Component Link

    Would you mind sharing your shock adjustment settings? I am similar weight and I am just about to get the same setup installed. First time I test a coil on the rise.
  8. A

    Rail to Rise ?

    Unfortunately, the Rise doesn’t have UDH, so it is not compatible with SRAM Transmission. Unfortunately, the Rise doesn’t have UDH, so it is not compatible with SRAM Transmission.
  9. A

    Rise Head angle adjust?

    You will decrease the reach with the slack-r, so it might be that it feels more cramped…
  10. A

    Rise Head angle adjust?

    Here is a product review with a solution for you:
  11. A

    Is Canyon changing to Bosch

    OR maybe the upcoming Bosch light weight motor?
  12. A

    Altering steering angle (Rise)

    https://9point8.ca/collections/slack-r-kits Mounting this in reverse should steepen the HTA. I would not recommend it, though.
  13. A

    Orbea Rise , anyone seen one yet ?

    Maybe 9point8 will come with something that fits? Slack-R is designed for integrated headsets.
  14. A

    Orbea Rise Custom M10

    @Rob Rides EMTB You got the range exender as well? That mount...
  15. A

    Levo Gen 2 Average rider (me) liked EXT coil, what about a Smashpot for the fork?

    Well, we just have to accept that your posts are objective and data based, and not based on your experience, right? @Gary
See more
Back
Top