Levo Gen 4 Headset Bearing Size -Chris King

[Decolocsta]

want to swap my Headset to a Chris King Dropset, can’t find any Information on whats the right one for the Levo 4.
Or the Dimensions for the current bearings.

Maybe you could help me out on this one; thx.

 

[Powerslider]

want to swap my Headset to a Chris King Dropset, can’t find any Information on whats the right one for the Levo 4.
Or the Dimensions for the current bearings.

Maybe you could help me out on this one; thx.

Our Levo 4 uses a 41.8 mm x 30.5 mm x 7 mm, 45º x 45º upper bearing; and a 52 mm x 40 mm x 7 mm, 45º x 45º lower bearing.

Chris King "Dropset 5."

DropSet™ 5

Why We Make This The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame’s headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning, we understood...

chrisking.com

 

[Decolocsta]

Our Levo 4 uses a 41.8 mm x 30.5 mm x 7 mm, 45º x 45º upper bearing; and a 52 mm x 40 mm x 7 mm, 45º x 45º lower bearing.

Chris King "Dropset 5."

DropSet™ 5

Why We Make This The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame’s headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning, we understood...

chrisking.com

Thx a lot