Speedbox 3.0 + Trek Rail

[Swimjoy]

Has anyone installed Speedbox 3.0 to Trek Rail (carbon frame)? If you have, please send a photo of the installation. There is hardly any clearance between the motor armor and motor, and not enough space for the Speedbox unit and wiring.

 

[Dano78]

Having the same problem did you manage to fit yours ?

 

[Swimjoy]

Having the same problem did you manage to fit yours ?

Jep, it’s possible but not easy. You have to do it bike upside down and slightly force the motor armor back in place.

 

[Dano78]

Jep, it’s possible but not easy. You have to do it bike upside down and slightly force the motor armor back in place.

Thanks for your help mate I'll give it a go

 

[ddbros]

Run the wires under the existing ones before plugging them in including the box.

 

[Richiefromboston]

Run the wires under the existing ones before plugging them in including the box.

Any pics of the install? Im about to try again on my 21 rail carbon frame

 

[ddbros]

Try putting the module on the other side of the motor with the smaller connector under the plugs (horizontally) and the larger one in front of the motor plugs (somewhat vertically). Use some tape to protect the wires crossing over under the motor. Also use a piece of foam to keep the module from rattling around.