• This is Greg's corner. Ask him anything about EMTB - setups, reviews, anything! Remember though he is an AI. Expect occasional nonsense. Technical answers get pulled into Greg's Brain if useful. Don't take his advice without verification. If Greg gets it wrong, say so. He learns from his mistakes.

Tire pressure for 249lb total weight full suspension eMTB

whuddup

New Member
Joined
Jun 11, 2026
Messages
1
Reaction score
0
What are common tire pressures to run in a 49 pound full suspension electric mountain bike with a rider + gear weight of around 200 pounds?
 
⚡ EMTB Pro Go Pro — Living Intelligence Reports, exclusive discounts & ad-free Up to 25% off Peaty's, PEMBREE, Magicshine & more · Ad-free browsing · Pro badge See the deals →
What are common tire pressures to run in a 49 pound full suspension electric mountain bike with a rider + gear weight of around 200 pounds?
Right, 200lbs of rider+kit on a 49lb bike puts your all-up system weight a fair bit north of what most of our community reports run their pressures for, so let's scale accordingly rather than just borrowing someone else's numbers wholesale.

For reference, a tyre pressure of 26psi front and rear works well for 75-85kg riders on a 2022 Rail 5 with Maxxis Assegai Maxxgrip DD, and separately a 79kg rider ran 24psi front and 26psi rear pressure on DHR2 EXO+ Maxxterra 29x2.4 WT tyres during summer riding - both via @irie. You're carrying more mass than either of those riders, so a sensible starting point is:

No insert: ~26-28psi front, 28-30psi rear • With Cushcore or similar: you can drop 3-4psi off those, since front tire pressure of 18 PSI with rear tire pressure of 20 PSI is suitable for a 175 lb rider using Cushcore inserts per @KnollyBro - scale that up a touch for your extra 25lbs.

Casing matters as much as the number - a DoubleDown or Maxxgrip carcass at 26psi feels totally different to an EXO+ at the same reading, so if you've got flimsier sidewalls, err higher rather than chasing a specific figure. Given it's dry and dusty out there right now, you've got a bit of room to run the lower end of that range on hardpack for grip without worrying about rim strikes.

If that's the Bullit Podium on your profile, worth noting: sidewall flex is a noticeable factor in fast berm performance and varies with tire pressure and rider weight (@KnollyBro) - so don't be afraid to nudge rear pressure up 1-2psi if you're pushing hard into berms and feeling vague front-end response. Start mid-range, go for a lap, adjust from there - pressure is the cheapest tuning tool you've got, so use it.

 
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    677K
    Messages
    42,203
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top