SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

Yeah!💥 The CEF50 will have a battery extender (water bottle cage fitment). It's a Bafang, see pic below.
Screenshot_20230224-074601.png

Size (Wh) and price are unknown...it's still under Bafang development. Fully comfortable with FT-014. 🤛

Linda says they're engineers confirm it should work with bigger 720Wh too...I hope so.🤞See Convo below.
Screenshot_20230224-075455.png

Screenshot_20230224-075535.png
 
⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
There is no way you can mix a 36v and 43v battery on the same motor. It is clear there are two bafang m820. One 36v version and another the 43v version. The F014 is a 43v battery and the 720wh is a 36v battery. Never the twix shall meet.
 
mike_kelly said:
There is no way you can mix a 36v and 43v battery on the same motor. It is clear there are two bafang m820. One 36v version and another the 43v version. The F014 is a 43v battery and the 720wh is a 36v battery. Never the twix shall meet.
Click to expand...
Yes, I saw the battery voltage differences. I just figured I'd probably be making my own with 720 Wh. I just didn't bring it to Linda. I don't think they care with 720 Wh...they figure no one will want it with a bigger battery.😲
 
Last edited:
Except me because I have to have 36v
Ah you mean nobody with a 720 will need an extender, quite so.
:)
I would get a 420 if it was 36v because I want the lightest version possible.
 
mike_kelly said:
Here is supplier showing you must choose between 36v and 43v
View attachment 107640
mike_kelly said:
Except me because I have to have 36v
Ah you mean nobody with a 720 will need an extender, quite so.
:)
I would get a 420 if it was 36v because I want the lightest version possible.
Click to expand...
Click to expand...
💯True, I just asked Linda if Bafang was going to make an extender for the 36V too...to help clarify.

Also, hoping that the CEF50 engineers might be inspired to make one.😜
Screenshot_20230224-093856.png
 
Last edited:
I just noticed on the other thread how the rear chainstays have an extra pivot bolt just anterior to the rear axle. This is exactly how transition builds their bikes.

Do any other brands build rear triangles with an extra pivot bolt like transition?

Could this possibly be a scrapped mold from transition?
 
Last edited:
Kenk3589 said:
I just noticed on the other thread how the rear chainstays have an extra pivot bolt just anterior to the rear axle. This is exactly how transition builds their bikes.

Do any other brands build rear triangles with an extra pivot bolt like transition?

Could this possibly be a scrapped mold from transition?
Click to expand...

Maybe they make for Transition.?💪Supposedly most of the big brands use a handful of Chinese frame manufacturers. So, It wouldn't surprise me.

Either way, hoping this CEF50 frame will be as stout as a great brand like Transition.😁
 
Last edited:
You notice that on the pictures laying out all the things you get with the frame.... It looks like the headset is a Zero Stack not an IS. I can't find a 66mm lower anywhere? Why a 52/66, to get the cables around the steerer tube?
 
I am thinking that Bafang makes a 36v battery that would fit the CEF50. If you look on the Battery chart in their catalog. The column that includes the BT F014 also has the BT F100. Same form factor and the column says voltages of 36,43. But if you then look at the specific page for each battery the BT F100 is listed as only 36v and the BT F014 only 43v. So I think that the BT F100 and the BT F014 both have the same form factory fit in the same downtube specification.

Batteries.png
BT F014.410.C.png


BT F100.B360.C.png
 
Just putting it out there: the biggest M820 "con" is range anxiety. Strongest field-tested argument yet.
Screenshot_20230225-120539.png

Screenshot_20230225-120639.png


A Range extender alleviates this issue. Let Linda know it's a prioriry. Check it out!
 
mike_kelly said:
Retailer?
View attachment 107984
Click to expand...
Hey that looks exactly familiar!😁 Yeah, I suspect that there might be a few of these "clone" or "open source" frames to pop up in the near future. Let's hope that the LCEF50 is the most well-built and reliable one. Also, providing good warranty support!🤞 But definitely good to have competition and get an official website as a backup.
 
One thing I did notice on CEF50 naked frame was a solid seatpost/seatmast when scrutinizing shock fitment of the coil. The Trust one has a cutout on the full build. So maybe ZCF just made a slight change to make less generic if that's what's happening?

Screenshot_20230219-110046.png Screenshot_20221216-084950~2.png
 
Of course, just bored waiting :)
Especially because of two entities need to sync, SZC and Bafang.
How is yours going to be shipped?
 
mike_kelly said:
Of course, just bored waiting :)
Especially because of two entities need to sync, SZC and Bafang.
How is yours going to be shipped?
Click to expand...
I suspect they'll ship battery and probably motor kit by boat separately. Frame by air/ground combo.

DengFu sent separately...frame first but that's probably random.
.
 
mike_kelly said:
Of course, just bored waiting :)
Especially because of two entities need to sync, SZC and Bafang.
How is yours going to be shipped?
Click to expand...

Cheapest/easiest. But I hear ya! My new parts are already collecting dusk making for an early Spring cleaning😎
PXL_20230227_170454186.jpg
PXL_20230227_170445562.jpg

Now I remember, DengFu sent my frame and motor separately from battery. The battery goes by boat, then ground if the same. Battery took two weeks longer. Just enough time to paint it and do stickers and partial wrapping with helicopter tape.
 
Last edited:
YA me too.
Also if there are any other cheapskates reading...
I picked up Rockshox Deluxe Select rear 210x50 on ebay for $143.
RocksohxDeluxe.jpg
 
Anyone have experience on spray painting the frame themselves?

Is it a fairly easy process?
 
Kenk3589 said:
Anyone have experience on spray painting the frame themselves?

Is it a fairly easy process?
Click to expand...
I just use generic paint spray cans (automotive customs mixes crazy expensive). Super easy to paint carbon...absorbs well like plastic and far easier than alloy.
 
The prep is important to a good paint job. Sand the whole frame with 600 grit, clean well. Mask well. Light coats sanded in between with yield the nicest finish. Rob actaully has a nice video of his painting the first Cheeb.

Although SZC will paint your frame very inexpensively.
 
Last edited:
mike_kelly said:
The prep is important to a good paint job. Sand the whole frame with 600 grit, clean well. Mask well. Light coats sanded in between with yield the nicest finish. Rob actaully has a nice video of his painting the first Cheeb.

Although SZC will paint your frame very inexpensively.
Click to expand...
Sure Rob was very thorough...metallic takes a little more effort. But honestly if you do full clear frame wrap you can skip at least the clear coat which is the hardest part. IMHO

Some manufacturers will do a custom fairly cheaply but the hue might be hard for them to match. Especially multi-colors.
 
Last edited:
Actually most support the Pantone system so the match would be as good as can be had.
 
mike_kelly said:
Actually most support the Pantone system so the match would be as good as can be had.
Click to expand...
Not my experience with past manufacturers....especially with fades and two-tones. Just say'n.
Plus, add another 1-2 weeks at least...not much is really done fast.
 
Last edited:
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    669K
    Messages
    41,009
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top