STUnlocker Android App for Shimano motors is available

The new version 1.9 was uploaded.
- "Mount angle" can be negative now
- added the new feature: it's possible to select "Preset" which will be automatically applied after establishing a connection with the bike. It can be canceled. Some customers wanted this feature for a case of Police control...
 
⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
New version with widgets and shortcuts for quick applying settings available at Google Play
"Panic" widget/shortcut for applying "Stock" settings
"Preset" widget/shortcut for applying custom Assist settings for bikes on which assist settings are not savable.
Updated manual includes all latest changes

Screenshot_1591645721.png
 
vadII said:
Why do you ask in STUnlocker thread? Anyway, do you need it? What information do you need to explain?
Click to expand...
Like they say, sometime you don't know what you don't know. Should I hunt down the ST Ride app and ask again?
 
Hi, I have two DU-E8000 equipped eMTBs, one have a SC-E8000 display and the other bike has a SC-E7000 display unit. I have a valid ST Unlocker license for each bike. I have successfully downgraded the bike with the EC-E8000 display to the 4.3.2 FW and applied custom speed limits for each mode through ST Unlocker. Can I temporarily connect the EC-E8000 display to the other bike, downgrade firmware and then reconnect the original SC-E7000 display? Will this work, and can I adjust the speed limit for each mode after reconnect the original display?
 
paalkr said:
Hi, I have two DU-E8000 equipped eMTBs, one have a SC-E8000 display and the other bike has a SC-E7000 display unit. I have a valid ST Unlocker license for each bike. I have successfully downgraded the bike with the EC-E8000 display to the 4.3.2 FW and applied custom speed limits for each mode through ST Unlocker. Can I temporarily connect the EC-E8000 display to the other bike, downgrade firmware and then reconnect the original SC-E7000 display? Will this work, and can I adjust the speed limit for each mode after reconnect the original display?
Click to expand...
No. E7000 display will not work with 4.3.2 because 4.3.2 was released before releasing the first version of E7000 display
 
vadII said:
No. E7000 display will not work with 4.3.2 because 4.3.2 was released before releasing the first version of E7000 display
Click to expand...

I see. My wife has ordered a Cannondale eMTB HT with E8000 display. I might "permanently borrow" that display. She will probably not notice any difference :D.

For my bike with the E7000 display I have the original 4.7.1 FW and have only changed the region to US. My other bike with the E8000 display runs the downgraded 4.3.2 FW and has custom speed limits pr mode. Exactly what is better with the 4.7.1 FW vs the 4.3.2 FW, comparing the original features from Shimano? Is there a change log available?
 
Hello Vadll. I would like to purchase this, but don't have email set up on my phone by choice - is there some other way of paying for this?
 
urastus said:
Hello Vadll. I would like to purchase this, but don't have email set up on my phone by choice - is there some other way of paying for this?
Click to expand...
Send to me a screenshot of Bike's info from the App
 
I am not trying to say...I am saying...lol
I have a Focus Jam2 and a Pivot Shuttle both de-restricted to 80km (which obviously they would never go that fast...but the point is...no limit) and I can control all power and torque aspects from the app...
 
just so we are clear I ride as a class one i just dont like the cut off and I prefer the commute to the trail to be a quick one
 
Cbmojo said:
I am not trying to say...I am saying...lol
I have a Focus Jam2 and a Pivot Shuttle both de-restricted to 80km (which obviously they would never go that fast...but the point is...no limit) and I can control all power and torque aspects from the app...
Click to expand...

...and your drive unit firmware is 4.7.1?
 
Cbmojo said:
yes it is on both
Click to expand...

Okay just so everything is clear here:
1. You have 2 e-mtb with Shimano E8000 and drive unit firmware on both is 4.7.1
2. You used the ePlus app only with the Bluetooth connection to the bike
3. You did not use a Shimano PC link or anything else
4. You did not downgrade your firmware at all
5. Using the ePlus app only you derestricted both bikes above 32mph/20mph

Am I missing anything in there? And how much did you pay?
 
I really like the STunlocker and have used it...I have respect for Vadll, this is really his forum so out of that respect to him just pm me and I will give you the detail
 
Cbmojo said:
I really like the STunlocker and have used it...I have respect for Vadll, this is really his forum so out of that respect to him just pm me and I will give you the detail
Click to expand...

You’re the one who brought up ePlus app in this thread in the first place, so you can just answer here. Why do I have to suddenly PM you for more detail? Is it like... some super secret stuff?? Or is there really more to it than you originally claimed?
 
lol...I brought it up passively to help you out...I was just trying to be respectful...I figured you could go to the site and check it out, I didn't really think I needed to hold your hand! I didn't claim anything other than I de-restricted my bike with 4.7.1 but here you go...
1. Yes
2. Not only the eplus app you need to connect to pc link to flash it
3. Once flashed you are free to use the app
4. No I did not downgrade my firmware
5.Yes

Its all straight forward...relative to the cost of the bike it is inexpensive maybe 300.00 us (including the pc link...which you should heve anyway to diagose your motor). You can always flash back to stock and I have over 500 miles and never an issue...actually I would say the bikes run better
 
Cbmojo said:
lol...I brought it up passively to help you out...I was just trying to be respectful...I figured you could go to the site and check it out, I didn't really think I needed to hold your hand! I didn't claim anything other than I de-restricted my bike with 4.7.1 but here you go...
1. Yes
2. Not only the eplus app you need to connect to pc link to flash it
3. Once flashed you are free to use the app
4. No I did not downgrade my firmware
5.Yes

Its all straight forward...relative to the cost of the bike it is inexpensive maybe 300.00 us (including the pc link...which you should heve anyway to diagose your motor). You can always flash back to stock and I have over 500 miles and never an issue...actually I would say the bikes run better
Click to expand...

LOL first of all, it has nothing to do with "holding hands". You alluded to something and I wanted more clarity... and after asking more questions, the actual facts comes out after all.

So in the end... you paid $300USD to get the Eplus app and the PC Link (which standalone costs around $200ish) to install some modified firmware to derestrict your E-bike; if that got you what you needed, then you got what you needed. That's perfectly fine.

For the benefit of others, they can also do what you did - OR instead use ST Unlocker (with the $33USD license), official Shimano E-Tube app (free), official Shimano firmware (unmodified and free), and nothing else (no need to buy the $200 Shimano SM-PCEx) and get the exact same results. (y)
 
lol..i didnt allude to anything...the facts are the facts there was nothing to come out...I simply said "try Eplus... a little pricey but work flawless with 4.7.1".

But since you put it that way...not sure why there are 11 pages of people trying to figure out how to downgrade their firmware and/or de-restrict their bike?

i was offering another option, plain and simple...I have nothing to sell and could care less what you choose

That's why life is about choice...

all good...cheers
 
Last edited:
Cbmojo said:
lol..i didnt allude to anything...the facts are the facts there was nothing to come out...I simply said "try Eplus... a little pricey but work flawless with 4.7.1".

But since you put it that way...not sure why there is 11 pages of people trying to figure out how to downgrade their firmware and/or de-restrict their bike?

i was offering another option, plain and simple...I have nothing to sell and have could care less what you choose

That's why life is about choice...

all good...cheers
Click to expand...

And the facts are, your other option is more complicated and more expensive.
plain and simple (y)

Cheers
 
Cbmojo said:
lol..i didnt allude to anything...the facts are the facts there was nothing to come out...I simply said "try Eplus... a little pricey but work flawless with 4.7.1".

But since you put it that way...not sure why there are 11 pages of people trying to figure out how to downgrade their firmware and/or de-restrict their bike?

i was offering another option, plain and simple...I have nothing to sell and could care less what you choose

That's why life is about choice...

all good...cheers
Click to expand...
Don't know why there are so many people trying to figure out how to downgrade the firmware. It takes about 5 minutes and is a piece of piss to do!

1 x android phone, 1 x Etube app on said phone, 1 x PC, 1 x downgraded firmware and 1 x ebike!

couldn't...
 
HORSPWR said:
Don't know why there are so many people trying to figure out how to downgrade the firmware. It takes about 5 minutes and is a piece of piss to do!

1 x android phone, 1 x Etube app on said phone, 1 x PC, 1 x downgraded firmware and 1 x ebike!

couldn't...
Click to expand...

OR
1 x iOS device, 1 x Etube app on said device, 1 x Mac, 1 x downgraded firmware and 1 x ebike! :LOL:

...TBH most of the ones I see, they want some sort of combination of 100% "they will not mess anything up" with 100% "hold my hand, tell me how to do it step by step".
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    669K
    Messages
    41,006
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top