When re greasing the linkage today the end of this bolt snapped, I recommend being careful tightening them this was with a torque wrench at 12NM.
This is my only problem so far after 100km of riding. The bike feels amazing, this is my first ebike so I don't have much to compare it to other than my stumpjumper. It rides chunky stuff super well and gives you a lot of confidence on descents. I have also hit some decent sized jumps on this bike and it jumps great, super stable in the air and still very nimble to whip. My only complaint is the headset cable routing if you're going to get this frame do yourself a favour and get it with cable routing holes and maybe think about asking for some extra bolts.
Here's a crappy jump clip
View attachment 125151 View attachment 125152
The same thing happened to me. I have to figure out a solution to this. Let me know if you come up with one before I do
if mainly on level 1 it can reach 90km with 2000m climb.Hi Everybody!
I’ve been reading this topic for a long time and am getting determined to build e-bike on CEF50 frame.
I currently have a 2019 Cube 120 HPC with a 500wh battery. I drive it mainly in eco mode, which allows me to cover about 60 km with a 2300-meter climb. I often want more, so I thought about the Bafang with 720wh battery.
Question for those who have already assembled their bike:
pproximately what distance and climb can be overcome on it?
Will I be able to make bigger runs than I can now on the Cube?
I started negotiations to purchase from this link "Unique Products To Sell Online 2023 29er Full Suspension Carbon Mountain Bike Frame Matte 29er/2.6" Non Toxic Bafang M820 - Buy Carbon Suspension Mtb Frame,29er Full Suspension Carbon Mountain Bike Frame,Frame 29er Full Suspension Product on Alibaba.com" Is this the correct link?
Jean wang advised for my interests (to drive further with minimal engine assistance) to order the e 48v/700wh battery option - do you agree with her?
Thanks in advance for your answers!
p.s.: sorry for my english
Did Anyone have a problem Getting these bolts, that hold the motor in place out? Three bolts just spinns around
Do yours have nylon nuts or allen keys heads on both sides? If you have nylon nuts they are bad news. I made it work by jamming a flat head screwdriver to stop it from rotating, which is a really bad idea but it worked. I ordered set of thin wall sockets and even those would not fit. I have no idea what they were thinking by using nylon nuts in a hole the exact same size as the nuts but apparentlly changed to the two allen head ones.
I have one on order, was dispatched yesterday. Remember you need the 245 v3 with Bluetooth 5.1 for Go+. The V2 has Bluetooth 5.0 which will connect to, but not work with, Go+ ! Anna Shens group seem to be the only people with the V3 in stock. Will write up about what it actually enables once I have it.Sorry to rehash the Bluetooth/GO+ for tuning characteristics.
Anyone have this DPC 245 display below?
Just curious to get some real-time feedback from those that have it. I'm good with my factory setup but wondering if it's worth the investment long-term. View attachment 125453 View attachment 125454
Is that Anna at Greenbikekit on AliExpress?I have one on order, was dispatched yesterday. Remember you need the 245 v3 with Bluetooth 5.1 for Go+. The V2 has Bluetooth 5.0 which will connect to, but not work with, Go+ ! Anna Shens group seem to be the only people with the V3 in stock. Will write up about what it actually enables once I have it.
I'd decided I was happy with most of my settings (M510 not 820) but startup angle would be nice to change. Was curious about go+ though and the idea of having a spare display and switch seemed worth it for future troubleshooting !Yeah, wise to wait before dropping another $100 unnecessarily.
The World's largest electric mountain bike community.