E-Tube Assist start settings

[Hasse E7000]

Hi

I would like to change the settings of: Assist start (Quick to Mild) in E-Tube, but I can not reach that settings. :In manual it says Assist patterns cannot be set in this application. ???? any suggestions??

Assist settings
You can configure the various settings related to the assist function of E-BIKE.
For details on the assist settings, see the help.

1. Tap the function to configure on the customization top screen.

1. Configure the various settings.
   Assist patterns cannot be set in this application.???????????
   Riding characteristic
   1. Select the type of riding characteristics for the assist functions.
   2. The BOOST, TRAIL, and ECO setting can only be changed when “CUSTOMIZE” has been selected in (1).

Selecting/creating an assist pattern (assist characteristic/upper limit torque/assist start)

1. Select profile 1 or profile 2.
   After exiting the application, assist is performed with the profile selected here.
2. Select the mode.
3. Select the various setting values.
   The range that can be selected differs for each setting value.

1. • The white circle on the slider indicates the initial value.
   • The setting values of other modes are displayed on the top of the scale (ECO in light blue, TRAIL in green, and BOOST in yellow).
2. Tap “APPLY”.
   The settings are reflected to the unit.

 

[cole_inman]

Bump. I've been taking my torque down to 50nm using Stunlocker, but recently my bike randomly wouldn't turn on. (waiting on the Shimano hard wire diagnostic tool) So I'm nervous on using Stunlocker again. Is the 2nd screenshot EP8 only?