Search results

  1. S

    Going mullet on Mondraker

    Hi m8, sorry I sold the bike (to fund DH bike) then had a moment of madness thought F'IT and bought a Santa Cruz Bullit ? (FYI I did put the 27.5 in but the BB looked horribly low so never tried it)
  2. S

    Going mullet on Mondraker

    https://acros-components.com/en/products/core/headsets/10057/blocklock-zs56-headset-lower-part That's the lower and what I replaced
  3. S

    Going mullet on Mondraker

    Had to replace the headset and the bearings after 600 miles. Other than that spot on.
  4. S

    Going mullet on Mondraker

    I wouldn't worry, Try both. I'm going to drop in my 27.5 rear off my Yeti Mullet to experiment. I've not done it yet at the full 29 is so good - not sure if I'll see a significant benefit. The 29 rear does roll over stuff better and with no side effects. As far as Mullet goes - I had a Yeti...
  5. S

    Going mullet on Mondraker

    It's a standard coil, I looked a progressive coil but was advised by TFtuned that a standard coil would work well with the Crafty leverage. It does extremely well ?? I'm 82kgs and run a 400lbs spring on the Crafty, due to the zero linkage the spring rate is low. As the RS and 38 are very close...
  6. S

    Going mullet on Mondraker

    The coil has transformed the bike, I had a long conversation with TFtuned and we look at the leverage curves of the Crafty and it lends itself well to using a coil. It's super supportive and so supple off the top its untrue. I ride hard and I can't seem to bottom it out (or it doesn't feel like...
  7. S

    Going mullet on Mondraker

    I've got the Ultimates but they are set and forget once you have the sag set.
  8. S

    Going mullet on Mondraker

    I've only just put the zebs on - I've done 500 miles on the standard set up 160/150 and that's what I was referring to. I've had arse rub on other bikes but I've not had t on the standard setup Crafty and I'm shorter that you. One major issue on the mullet option is the bb height as it already...
  9. S

    Going mullet on Mondraker

    Hi m8, I've got a Crafty Carbon R in Medium and I'm only 5'7 ( I also have a Yeti SB165 which is mulleted) I thought I'd mullet the Crafty but after riding it I'm not going to do it. The geo numbers and the way you sit on the bike does not warrant mulleting. I can run faster and better on super...
Top