Yes, the data is pleasant, but it is necessary to take into account that it applies to summer use.
Winter operation will certainly be more demanding in terms of consumption and endurance, so we will only see what it will look like in spring.
As for possible problems with the 630Wh battery, I haven't noticed any yet. This year, in 2021, I unfortunately had some extra health problems, and I couldn't ride as much as I would like. I use two 503Wh batteries alternately, and this new 630Wh battery, which I have driven so far only 2391 km...
Yes, it works flawlessly, and it's as I described in a previous post: the Shimano 630Wh external battery fits in the XL frame of my Merida eONE SIXTY 2019, and does not come into contact with the shock absorber air chamber at any point along the entire stroke path, but there will always be...
... so I made some measurements to see if the battery, which is about 17 mm higher, fits in front of the muffler. It looked tight, but I ordered the battery, and it arrived yesterday.
And it turned out well, the 630Wh external battery fits into the XL Merida eONE SIXTY 2019 frame even with a...
Hi Bravestarre, thank you, that's not good, that's a shame.
I'm just deciding to buy a second battery, BT-8010 or BT-8016, and I'd rather have more capacity.
But I ride on an XL frame of size, in which there is a little more free space, a bottle can even fit in the frame.
I couldn't find any...
Pipo, Before I started editing, I bought Mortop CHB-1 screws, 16 mm long, which I wanted to shorten as needed.
But in the end, the original Shimano screws were sufficient.
For larger days I carry a bag of the required size.
But for shorter rides without a bag, I carry the necessary little things in the Acepac Fuel Frame Bag M black, attached to the frame. Fits ORANGE SEAL Regular Tubeless Sealant Refills - 4 oz / 118 ml, Radon CO2 pump with pressure gauge, CO2...
Hi, I have Merida e-160, XL frame. I use a 38T Shimano chain rings. Its circumference is too large, so I had to use washers, first about + 1 mm, finally it is about + 2 mm, and longer screws. The chain of 116 articles remained original. It was also necessary to slightly adjust the chain guide...