No worries buddy?I always find the hard way?looking at it I think it’s quite safe the way it’s designed just rattled like crazy (the mechanism not the battery) I still rapped electrical tape round the battery just in case till I got back to the car?
Hi peeps I’m 90lbs riding weight with a 400lbs spring and seam to have settled on 11 clicks in from open,just wondering what you guys run? I have 4 clicks of lsc on also.
Been out today and feels so much better not to have a steering block,I know if the bars twisted round once it would probably either pull the cable out of the display unit or snap it but I can twist the bars round 180 and it’s putting no pressure on the cables and the brake hose kind of stops it...
Just came back from a ride and the front even though the same sag feels higher like I’ve put a 10mm stem spacers in,I’m guessing if you were to set the sag previously while riding you’d of probably seen 35% just seens to hold its nose up more and noticed more pop of jumps with nearly 15psi less ?
All went well apart from not having anything substantial to press the rather heavy duty cane creek 3.5mm thick solid steel crown race(never needed anything before as normally split or thin)so when the plastic pipe split I ended up using the bearing extractor in reverse,the acros lockblock needed...
I’m glad I went with commencal and out of Nukeproof,vitus,whyte And cannondale I’ve had the best customer services with these guys,you don’t see many about either and that gives it you back when peeps are looking all over it on the trails,regards build quality there nothing yet I’ve found which...
I’ve gone to 50mm stem on my large now and for me it feels spot on,though nothing to do with sit down reach I just like to feel the bar more forward when in the attack position,makes me feel like I’m inside the bike rather than standing over the top,I settled on 60mm on my Nukeproof mega large...
I take it these acros bearings are supposed to stay intact inside the cup? I couldn’t get the bearings out of the cup,oh well at least I know I need a top cup as two of the Ball bearings are damaged and grindy?ive ordered a cane creek internal zs44/56 without a block lock as you can replace the...
Have any of you peeps got this?when pulling sideways(up with one hand down with other)force on the handlebars?,I’ve had the whole assembly out ie stem cleaned,forks out cleaned,bearings out cleaned,plenty of grease and friction paste where required,the only thing I couldn’t remove was that beefy...