Search results for query: *

Hello, I have the same bike as you, and I replaced the 9/46 cassette with a 10/48 garbaruk, (forced to replace the gear cage with a garbaruk cage) for 1 year and 4000 km everything is fine. gears still shift as well and silently. If you go to 10/46, no need to replace the gear cage. I replaced...

remove the protection under the motor held by 4 screws, 2 in front and 2 behind, be careful to hold the motor, so as not to break the battery connector when falling.

the problem is due to the value of the wheel circumference set in the decoy, Yt set a value of 2300 mm which is the circumference value of a wheel of 29 ", you have to set the correct value for a wheel of 27 , 5 "which is 2180 mm and you will have a correct speed limit

27,5 " or 2180 mm circumference .

have you correctly adjusted the wheel circumference, mine arrived with a circumference of 29 "when you have to adjust to 27.5" and that could explain the speed shift you have

okay thank you so much ;)

Hello Jan, have you made any progress in developing your Connect IQ app on garmin edge meters?

it is done without deflating the shock absorber.

it works like that, except for the trail mode which would not be linear dixit shimano, I have doubts and the eco mode which is adjustable like the others

sorry, but I did not feel that at all, after several attempts, I returned to the classic use of trail mode

eco: 40/70 trail: 70/70 boost: 120/70, my outings are on average 40km and 700d + at 15km / h on average and I have 50% of battery on average on arrival.

I confirm that this app (Shimano step E8000 data fields) does not communicate even on an edge 530 associated with sc7000

jan's app only works for spe levo currently, it hasn't finished the one for shimano

ok, but in one case we have the ANT private protocol and in the other the bluetooth, those are two different channels? so you can't use the smartphone with the garmin at the same time, it's less interesting for me.

the garmin disconnects from the bike when I start the app and I no longer have the bike information on the garmin ,. on the smatphone, everything works fine, I have no disconnection.

ok, i found to export the data, thanks for the disconnection of the "electric bike sensor" do you have an explanation,?

hello vadll, I tested the alpha version of ST Ride, it connects well to the bike, and correctly retrieves the data, I did not find the data file on my smartphone, where is it located? there is a problem, with my garmin edge 530, when the application is in service, it deactivates the sensor...

the garmin and the decoy communicate via the ant private protocol, if you have an edge 530,830,1030, you do a sensor search on the edge and it will connect directly to the bike, and in a profile, you add the parameter shimano steps 8000 which will show you all the bike data

ok thanks, if you need to test, I have an edge 530 and a step 8000 with display SC7000