Search results for query: *

What charging sockets are out there that work well with this frame ? The housing for the one I have from Aliexpresss is little small and I have used a couple washers to make it work. Also, a four pin would be useful to allow an extender battery to use the same port.

The frame comes with the hardware for one end of the shock only. The other end needs a 22.2mm m8 bolt with spacers specific to the shock.

The Can confirm the bearing presses directly into the frame and the bearing sits directly on the crown race. No cups. The bearing surfaces are angled to recess into the frame and match the crown race

I’m in New Plymouth, you are most welcome to check it out!! I’m not a great mountain biker or “bike guy” but I have some good friends who I ride with who are. All very impressed with the frame look, geometry and quality.

My motor was supplied with a different set of cables. I have a 8pin next to the power supply which changes to a five pin into the handlebar display (I have no idea what happens to the other 3 pins?). The display then daisy chains to the switch. On the back of the motor there is a 8 pin for the...

50.4V 5A 12S 44.4V LCD Dispay Li-ion Lipo Battery OLED Display Fast Charger OHRIJA https://a.aliexpress.com/_msqNG1u

I used Sanyo ncr20700b cells, 4200mah, 2p12s

Sorry, not sure about the speed as I haven’t been able to get it running for more than a couple seconds before the speed sensor trip stops the motor. The speed sensor connectors don’t match. Should have it going in a few days though…

Pretty sure the supplied Chianring is steel. I was thinking the same with the spray can to fix… just a bit annoying to need to do it

The brakes seem to have pretty good stopping power and well made. Will see how the last!!

126g grams is the chainring only, the spider is very, very, heavy, around 300g from memory.

Sorry, no pics of the battery, BMS below, it’s a smart BMS with Bluetooth to show the cell voltage etc

Overall very happy with the frame, the only issues I have with the frame is mounting the motor. The bolt nearest the battery has some bushings to go in which are practically impossible to install, anyone found an way?. It is a very tight fit with the motor housing and they won’t sit in without...

Some motor internal pics, thought I had a motor connection issues to resolve, but was my battery! A lot of grease in the controller which is not ideal?

Yes the tires are relatively heavy. The areas where weight could be reduced are the tires, cranks, bafang chainring spider, dropper, and perhaps titanium bolts? probably another ~ 1kg The standard bafang chainring, bolts and spider are very heavy (all steel) - a bit strange given the efforts to...

It’s a bit agricultural for now, but holding in very sold. I have used a carbon / plastic plate on the bottom of the battery with tapped screw holes aligning with the frame holes. I am making a 3d printed version to allow a nut to be used instead as I dont trust the plastic threaded tapping

Will let you know about the wheels and bars. The bars are from LC, the wheels from aliexpress NZ$661.38 28％ Off | 29er Carbon MTB Wheelset Ultralight Ratchet System UCI Approved 6 Bolt / Center Lock Boost 15x110 12x148 Tubeless MTB Wheels 29 https://a.aliexpress.com/_mNFnbtU

Hi Plumtree, no I don’t know Goff but would be awesome to touch base and see how he is going with the befang. I hear you are getting an e-bike also?

Hi Wayne, small world… thats very close to where I live!! although you are not supposed to… a lot of guys ride those walking tracks at night time. Most are old school analog and push up…. But with an e-bike.. hmmm

Hi, I’m in Taranaki, what sort of bike do you ride?