Search results

  1. dirty bob

    Kenevo Gen1 Kenevo 2020 - Annoying Rattle

    Did the wrapping and padding under the tcu. didn't solve it. going to try the area near the shock going up toward the tcu next. thanks for the suggestions guys.
  2. dirty bob

    Kenevo Gen1 Kenevo 2020 - Annoying Rattle

    Rattling? I appreciate the reply, but that thing is so machined to fit those threads and is on there so snug (I've pulled it off and put it on at least three or four times for various reasons), there is absolutely no way it could be rattling unless it's completely off and I would see it. Any...
  3. dirty bob

    Kenevo Gen1 Kenevo 2020 - Annoying Rattle

    any fixes for this found? I know it's 2 years later, but I've had what sounds like cable rattle on my '22 since I bought it. I've tried shoving foam from a pool noodle (pipe insulation) in from the power button unit. wrapped the cables themselves individually in soft sleeves for cords... no...
  4. dirty bob

    Kenevo Gen1 Official 2018/2019 Kenevo thread

    anybody find an app or a chip/device that works to unlock the speed on a '19 kenevo? From what I understand, blevo doesn't work anymore, and e-genesis used to work, but since I got my replacement motor it says the bike is incompatible. My new motor is set to like 14 mph and it's killing me...
  5. dirty bob

    Kenevo Gen1 Official 2018/2019 Kenevo thread

    awwwww yeah. The dh38 ran like a dream right outta the box. And the 29 in front felt great!
  6. dirty bob

    Kenevo Gen1 Official 2018/2019 Kenevo thread

    nice! and you just kept the old tapered 1.5 to 1.125 headset in there and it works great?
  7. dirty bob

    Kenevo Gen1 Official 2018/2019 Kenevo thread

    anyone know what headset i need to put a dh38 on a '19 kenevo? and do i need a crown race? it's a straight steer tube and the lyrik i'm taking off is tapered so I gotta pick up a new set of bearings with a reducer I'm guessing. thanks for any info.
  8. dirty bob

    Kenevo Gen1 Official 2018/2019 Kenevo thread

    Is anyone else blowing the sidewall right at the bead on DHR's on their Kenevo? My last 3 blew right where the rim hooks to the bead before the tread was worn down. The first was a 2.8 on the stock 38mm internal roval rim, running about 25 psi. The second was a 2.6 on the stock 38mm internal...
  9. dirty bob

    Carbon rims on a 2019 Levo

    How u How u liking those 735 e's? I had a pair of 730 s on my Canfield and they were the best wheels I ever rode, but I just pulled the trigger on a set of Reynolds tr 367e's for my Kenevo after destroying my rear wheel a couple days ago. Figured I'd give that company a try since it's half the...
  10. dirty bob

    Third ride back after shock swap and bike turns off

    Had a buddy have a few surges and his would go out too (on a kenevo) and he found that the insulation on the wire running down the stays had rubbed off on his rotor. Just another thing to check. Hope you get it up and running!
  11. dirty bob

    My 2019 kenevo's cassette just broke off the hub?!

    Where did you pick up the cranks? I wanted to get 165's but when I contacted praxis they told me they only sold carbon after markets for over $200 and only made aluminums for stock kenevos sold from shops!
  12. dirty bob

    My 2019 kenevo's cassette just broke off the hub?!

    That's EXACTLY what mine looks like. In order to ride the bike home, I had to squeeze the cassette pawls back into the the depression in the wheel, fit it into the dropouts without it wobbling off, then tighten the axle on it, just so I could coast the flat tire 3 miles downhill to catch a...
  13. dirty bob

    My 2019 kenevo's cassette just broke off the hub?!

    Got a flat today and pulled the wheel off and the hub broke off at the cassette and hit the ground. Anybody else's levo or kenevo have the same issue? Then I had to ride home on the rim because of an emergency and just pulled the trigger on a set of Reynolds tr 367 e's to replace the ones I...
  14. dirty bob

    2019 Kenevo not charging?

    Hi All, Came out this morning to unplug the Kenevo and realized the plug side of the charger was unattached to body of the charger. Battery was not charged, of course, so I unplugged everything, reassembled it and the bike isn't taking a charge. No red indicator light on charger, and no...
  15. dirty bob

    Kenevo Gen1 Official 2018/2019 Kenevo thread

    large. I'm a little over 6' with a 31" inseam and it fits perfect (extra info for anyone else interested in sizing). I did chop about 3/4" off each side of the bars, and put Wolftooth Fatpaws on it. I'm making it tubeless today, and- even though I do fit over the seat on steeps and jumps, I'm...
  16. dirty bob

    Kenevo Gen1 Official 2018/2019 Kenevo thread

    Thanks for the suggestion. I have a '19 kenevo expert. I just went 16 oz and it fit. Now that I moved the cage down, it barely fits the 21 oz, but better than your crammed in-bottle. Haha. That makes me feel better to know others gotta cram that thing in there as best they can too In messing...
  17. dirty bob

    Kenevo Gen1 Official 2018/2019 Kenevo thread

    Anyone find a water bottle that fits a 2019 kenevo? I've worn a pack for so long and ridden bikes that couldn't fit a cage, I know nothing about bottles, and the first one I bought, a 21oz camelbak bottle didn't fit! Thanks in advance for any recommendations.
Top